Home
Главная
Makita
Триммер
ur3501
Руководство пользователя Страница: 10

Makita ur3501 [10/224] Maintenance

Attachment of shoulder harness (Fig. 9)

Adjusttheharnesslengthsothatthecuttingtooliskept

parallelwiththeground.

Connectthehangerandtheharness.

WARNING:

• Be extremely careful to maintain control of the tool

at all times. Do not allow the tool to be deected

toward you or anyone in the work vicinity.Failureto

keepcontrolofthetoolcouldresultinseriousinjuryto

thebystanderandtheoperator.

Adjustment of the hanger position and shoulder

harness (Fig. 10)

To change the hanger position, loosen the bolt on the

hanger.Thenmovethehanger.

Afteradjustingthehangerposition,tightentheboltwith.

MAINTENANCE

WARNING:

• Always be sure that the tool is switched off and

unplugged before attempting to perform inspection

or maintenance on the tool. Failure to switch off

andunplugmayresultinseriouspersonalinjuryfrom

accidentalstart-up.

NOTICE:

• Never use gasoline, benzine, thinner, alcohol or the

like.Discoloration,deformationorcracksmayresult.

Replacing the nylon cord (Fig. 11)

WARNING:

• Make sure that the nylon cutting head is secured to

the tool properly before operation.Failuretoproperly

securethenyloncuttingheadmaycauseittoyapart

resultinginseriouspersonalinjury.

1. Remove the lock screw by turning it

counterclockwise.

2. Removethespoolandthecup.Andremovetheold

nyloncordfromthespool.

3. Cutanyloncordin3–6m.Foldthecuttingcordin

twohalves, leave oneof half longer80 – 100mm

thananother.(Fig. 12)

4. Hookthemiddleofthenewnyloncordtothenotch

locatedatthecenterof thespoolbetweenthetwo

channelsprovidedforthenyloncord.(Fig. 13)

5. Wind both ends rmly along the channels in the

directionindicatedbyarrowmarkonthespool.

6. Install the nylon cutting head as described in this

instructionmanual.(Fig. 14)

To maintain product SAFETY and RELIABILITY,

repairs,anyothermaintenanceoradjustmentshouldbe

performedbyMakitaAuthorizedServiceCenters,always

usingMakitareplacementparts.

Makita ur3501 [10/224] Maintenance

Содержание

Похожие устройства