Home
Главная
Hotpoint-Ariston
Плиты
C 3 VN1 R/HA
Инструкция по эксплуатации Страница: 10

Hotpoint-Ariston C 3 VN1 R/HA [10/20] Care and maintenance

Switching the appliance off

Disconnect your appliance from the electricity supply

before carrying out any work on it.

 Never use steam cleaners or pressure cleaners on the

appliance.

Cleaning the oven

 The stainless steel or enamel-coated external parts

and the rubber seals may be cleaned using a sponge

that has been soaked in lukewarm water and neutral

soap. Use specialised products for the removal of

stubborn stains. After cleaning, rinse and dry

thoroughly. Do not use abrasive powders or corrosive

substances.

 The inside of the

oven should ideally be cleaned after

each use, while it is still lukewarm. Use hot water and

detergent, then rinse well and dry with a soft cloth. Do

not use abrasive products.



Clean the glass part of the oven door using a sponge

and a non-abrasive cleaning product, then dry

thoroughly with a soft cloth. Do not use rough

abrasive material or sharp metal scrapers as these

could scratch the surface and cause the glass to

crack.

 The accessories can be washed like everyday

crockery, and are even dishwasher safe.

 Dirt and grease should be removed from the control

panel using a non-abrasive sponge or a soft cloth.

Inspecting the oven seals

Check the door seals around the oven regularly. If the

seals are damaged, please contact your nearest After-

sales Service Centre. We recommend that the oven is

not used until the seals have been replaced.

Replacing the oven light bulb

1. After disconnecting the oven from the

electricity mains, remove the glass lid

covering the lamp socket (IAA BECKHA).

2. Remove the light bulb and replace

it with a similar one: voltage 230 V,

wattage 25 W, cap E 14.

3. Replace the lid and reconnect the

oven to the electricity supply.

Cleaning the glass ceramic hob

 Do not use abrasive or corrosive detergents (for

example, products in spray cans for cleaning barbecues

and ovens), stain removers, anti-rust products, powder

detergents or sponges with abrasive surfaces: these

may scratch the surface beyond repair.

It is usually sufficient simply to wash the hob

using a damp sponge and dry it with absorbent

kitchen roll.

If the hob is particularly dirty, rub it with a special

glass ceramic cleaning product, then rinse well

and dry thoroughly.

To remove more stubborn dirt, use a suitable

scraper (this is not supplied

with the appliance).

Remove spills as soon as possible, without

waiting for the appliance to cool, to avoid

residues forming crusty deposits. You can obtain

excellent results by using a rustproof steel wire

sponge - specifically designed for glass ceramic

surfaces - soaked in soapy water.

If plastic or sugary substances have accidentally

been melted

on the hob, remove them

immediately with the scraper, while the surface is

still hot.

 Once it is clean, the hob may be treated with a

special protective maintenance product: the

invisible film left by this product protects the

surface from drips during cooking. This

maintenance should be carried out while the

appliance is

warm (not hot) or cold.

 Always remember to rinse the appliance well with

clean water and dry it thoroughly: residues can

become encrusted during subsequent cooking

processes.

Glass ceramic hob

cleaners

Available from

Window scraper Razor blade

scrapers

DIY Stores

Replacement blades DIY Stores,

supermarkets,

chemists

COLLO luneta

HOB BRITE

Hob Clean

SWISSCLEANER

Boots, Co-op stores,

department stores, Regional

Electricity Company shops,

supermarkets

Cleaning stainless steel

Stainless steel can be marked by hard water that has

been left on the surface for a long time, or by aggressive

detergents that contain phosphorus. We recommend

that the steel surfaces are rinsed well then dried

thoroughly.

Assistance

Please have the following information handy:

 The appliance model (Mod.).

 The serial number (S/N).

This information can be found on the data plate

located on the appliance and/or on the packaging.

Care and maintenance

Содержание

Похожие устройства

Care and maintenance Switching the appliance off GB Disconnect your appliance from the electricity supply before carrying out any work on it Never use steam cleaners or pressure cleaners on the appliance Cleaning the oven The stainless steel or enamel coated external parts and the rubber seals may be cleaned using a sponge that has been soaked in lukewarm water and neutral soap Use specialised products for the removal of stubborn stains After cleaning rinse and dry thoroughly Do not use abrasive powders or corrosive substances The inside of the oven should ideally be cleaned after each use while it is still lukewarm Use hot water and detergent then rinse well and dry with a soft cloth Do not use abrasive products Clean the glass part of the oven door using a sponge and a non abrasive cleaning product then dry thoroughly with a soft cloth Do not use rough abrasive material or sharp metal scrapers as these could scratch the surface and cause the glass to crack The accessories can be washed like everyday crockery and are even dishwasher safe Dirt and grease should be removed from the control panel using a non abrasive sponge or a soft cloth Inspecting the oven seals Check the door seals around the oven regularly If the seals are damaged please contact your nearest After sales Service Centre We recommend that the oven is not used until the seals have been replaced Replacing the oven light bulb 1 After disconnecting the oven from the electricity mains remove the glass lid covering the lamp socket see figuré 2 Remove the light bulb and replace it with a similar one voltage 230 V wattage 25 W cap E 14 3 Replace the lid and reconnect the oven to the electricity supply Cleaning the glass ceramic hob Do not use abrasive or corrosive detergents for example products in spray cans for cleaning barbecues and ovens stain removers anti rust products powder detergents or sponges with abrasive surfaces these may scratch the surface beyond repair It is usually sufficient simply to wash the hob using a damp sponge and dry it with absorbent kitchen roll 10 If the hob is particularly dirty rub it with a special glass ceramic cleaning product then rinse well and dry thoroughly To remove more stubborn dirt use a suitable scraper this is not supplied with the appliance Remove spills as soon as possible without waiting for the appliance to cool to avoid residues forming crusty deposits You can obtain excellent results by using a rustproof steel wire sponge specifically designed for glass ceramic surfaces soaked in soapy water If plastic or sugary substances have accidentally been melted on the hob remove them immediately with the scraper while the surface is still hot Once it is clean the hob may be treated with a special protective maintenance product the invisible film left by this product protects the surface from drips during cooking This maintenance should be carried out while the appliance is warm not hot or cold Always remember to rinse the appliance well with clean water and dry it thoroughly residues can become encrusted during subsequent cooking processes Glass ceramic hob cleaners Available from Window scraper Razor blade scrapers DIY Stores Replacement blades DIY Stores supermarkets chemists COLLO luneta HOB BRITE Hob Clean SWISSCLEANER Boots Co op stores department stores Regional Electricity Company shops supermarkets Cleaning stainless steel Stainless steel can be marked by hard water that has been left on the surface for a long time or by aggressive detergents that contain phosphorus We recommend that the steel surfaces are rinsed well then dried thoroughly Assistance Please have the following information handy The appliance model Mod The serial number S N This information can be found on the data plate located on the appliance and or on the packaging

Скачать