Tp-Link TD-W8151N [24/69] Internet

TD-W8151N 150Mbps Wireless N ADSL2+ Modem Router User Guide

4.3.1 Internet

Choose “Interface Setup→Internet” menu, you can configure the parameters for WAN ports in

the next screen (shown in Figure 4-4).

Figure 4-4

¾ ATM VC: ATM settings are used to connect to your ISP. Your ISP provides VPI (Virtual Path

Identifier), VCI (Virtual Channel Identifier) settings to you. In this Device, you can totally setup

8 VCs on different encapsulations, if you apply 8 different virtual circuits from your ISP. You

need to activate the VC to take effect. For PVCs management, you can use ATM QoS to

setup each PVC traffic line's priority.

• Virtual Circuit: Select the VC number you want to setup, PVC0~PVC7.

• Status: If you want to use a designed VC, you should activate it.

• VPI: Identifies the virtual path between endpoints in an ATM network. The valid range is

from 0 to 255. Please input the value provided by your ISP.

• VCI: Identifies the virtual channel endpoints in an ATM network. The valid range is from

32 to 65535 (1 to 31 is reserved for well-known protocols). Please input the value

provided by your ISP.

• PVCs Summary: Click the button, and you can view the summary information about the

PVCs.

• ATM QoS: Select the Quality of Service types for this Virtual Circuit, including CBR

(Constant Bit Rate), UBR (Unspecified Bit Rate) and VBR (Variable Bit Rate). These QoS

types are all controlled by the parameters specified below, including PCR (Peak Cell

Rate), SCR (Sustained Cell Rate) and MBS (Maximum Burst Size), please configure

them according your needs.

¾ Encapsulation: There are four connection types: Dynamic IP Address, Static IP Address,