D-Link DVA-G3340S Инструкция по эксплуатации онлайн [27/78] 41892

D-Link DVA-G3340S Инструкция по эксплуатации онлайн [27/78] 41892
DHCP Settings
Home > DHCP
Configure DHCP server settings for the LAN
The two options for DHCP service are as follows:
You may use the Router as a DHCP server for your LAN.
You can disable DHCP service and manually configure IP settings for
workstations.
You may also configure DNS settings for the LAN when using the Router in DHCP
mode. In Auto DNS Mode, the Router will automatically relay DNS settings to properly
configured DHCP clients. To manually enter DNS IP addresses, select the Manual DNS
Mode option and type in a Primary and Secondary DNS IP Address in the field
provided. The manually configured DNS settings will be supplied to clients that are
configured to request them from the Router.
Follow the instructions below according to which of the above DHCP options you want
to use. When you have configured the DHCP Settings as you want them, click the
Apply button to commit the new settings. The new settings must be saved and the
Router must be restarted for the settings to go into effect. To save the new settings and
The DHCP server is enabled by
default for the Router’s Ethernet
LAN interface. DHCP service
will supply IP settings to
workstations configured to
automatically obtain IP settings
that are connected to the Router
though an Ethernet port. When
the Router is used for DHCP it
becomes the default gateway
for DHCP client connected to it.
Keep in mind that if you change
the IP address of the Router the
range of IP addresses in the
pool used for DHCP on the LAN
will also be changed. The IP
address pool can be up to 253
IP addresses.
To display the DHCP Server
menu, click the DHCP button in
the Home directory. Any active
DHCP Clients appear listed in
the DHCP Client List below the
configuration menu. The IP
address and MAC address for
active DHCP clients are
displayed in the list.

Похожие устройства

Скачать