D-Link DVA-G3340S Инструкция по эксплуатации онлайн [28/78] 41892

To disable DHCP, click to

select the None DHCP

option and click on the

Apply button. Choosing

this option requires that

workstations on the local

network must be configured

manually or use another

DHCP server to obtain IP

settings.

If you configure IP settings

manually, make sure to use

IP addresses in the subnet

of the Router. You will need

to use the Router’s IP

address as the Default

Gateway for the

workstation in order to

provide Internet access.

restart the Router, click on the Tools directory tab and then click the System menu

button. Click the Reboot button under Force the DVA-G3340S to system restart.

The Router will save the new DHCP settings and restart.

Use the Router for DHCP

To use the built-in DHCP server, click to select the DHCP Server option if it is not

already selected. The IP Address Pool settings can be adjusted. The Starting IP

Address is the lowest available IP address (default = 192.168.1.2). If you change the IP

address of the Router this will change automatically to be 1 more that the IP address of

the Router. The Ending IP Address is the highest IP address number in the pool. Type

in the Lease Time in the entry field provided. This is the amount of time in seconds that

a workstation is allowed to reserve an IP address in the pool if the workstation is

disconnected from the network or powered off.

Disable the DHCP Server

DHCP Settings menu with DHCP disabled