![Hikoki M 12V2 [11/48] English](/img/pdf.png)
Hikoki M 12V2 [11/48] English
![Hikoki M 12V2 [11/48] English](/views2/1471524/page11/bgb.png)
10
English
between the radius of the template guide and the
radius of the bit. The reverse is true when using
the router along the exterior of the template.
(3) Straight guide
Use straight guide for chamfering and groove cutting
along the materials side.
1 Insert the guide bar into the hole in the bar holder,
then lightly tighten the 2 wing bolts (A) on top of
the bar holder.
2 Insert the guide bar into the hole in the base, then
firmly tighten the wing bolt (A).
3 Make minute adjustments of the dimensions between
the bit and the guide surface with the feed screw,
then firmly tighten the 2 wing bolts (A) on top of
the bar holder and the wing bolt (B) that secures
the straight guide.
4 As shown in Fig. 14, securely attach the bottom of
the base to processed surface of the materials. Feed
the router while keeping the guide plane on the
surface of the materials.
(4) Dust guide and Dust guide adapter (Fig. 15)
Your router is equipped with dust guide and a dust
guide adapter.
1 Match the 2 grooves on the base and insert the
2 dust guide tabs in holes located in the base side
from the top. Tighten the dust guide with a screw.
The dust guide diverts cutting debris away from the
operator and directs the discharge in a consistent
direction.
2 By fitting the dust guide adapter into the dust guide
cutting debris discharge vent, the dust extractor can
be attached.
4. Adjusting the rotation speed (Model M12V2 only)
The M12V2 has an electronic control system that
allows stepless rpm changes.
As shown in Fig. 16, dial position “1” is for minimum
speed, and position “6” for maximum speed.
5. Removing the spring
The springs within the column of the router can
be removed. Doing so will eliminate spring
resistance and allows easy adjustment of cutting
depth when attaching the router stand.
(1) Loosen the 4 sub base screws, and remove the sub
base.
(2) Loosen the stopper bolt and remove it, so the
spring can be removed. (Fig. 17)
CAUTION
Remove the stopper bolt with the main unit (router)
fixed at its maximum height.
Removing the stopper bolt with the unit in a
shortened condition may cause the stopper bolt and
spring to be discharged and cause injury.
6. Cutting
CAUTION
䡬 Wear eye protection when operating this tool.
䡬 Keep your hands, face and other body parts away
from the bits and any other rotating parts, while
operating the tool.
(1) As shown in Fig. 18, remove the bit from the work
pieces and press the switch lever up to the ON
position. Do not start cutting operation until the bit
has reached full rotating speed.
(2) The bit rotates clockwise (arrow direction indicated
on the base). To obtain maximum cutting
effectiveness, feed the router in conformance with
the feed directions shown in Fig. 19.
NOTE
If a worn bit is used to make deep grooves, a high
pitched cutting noise may be produced.
Replacing the worn bit with a new one will eliminate
the high pitched noise.
USING THE OPTIONAL ACCESSORIES
Trimmer Guide (Fig. 20):
Use the trimmer guide for trimming or chamfering.
Attach the trimmer guide to the bar holder as
shown in Fig. 21.
After aligning the roller to the appropriate position,
tighten the two wing bolts (A) and the other two
wing bolts (B). Use as shown in Fig. 22.
MAINTENANCE AND INSPECTION
1. Oiling
To ensure smooth vertical movement of the router,
occasionally apply a few drops of machine oil to
the sliding portions of the columns and end bracket.
2. Inspecting the mounting screws
Regularly inspect all mounting screws and ensure
that they are properly tightened. Should any of the
screws be loose, retighten them immediately. Failure
to do so could result in serious hazard.
3. Maintenance of the motor
The
motor unit winding is the very “heart” of the
power tool.
Exercise due care to ensure the winding does not
become damaged and/or wet with oil or water.
4. Inspecting the carbon brushes
For your continued safety and electrical shock
protection, carbon brush inspection and replacement
on this tool should ONLY be performed by a HiKOKI
AUTHORIZED SERVICE CENTER.
5. Replacing supply cord
If the supply cord of Tool is damaged, the Tool
must be returned to HiKOKI Authorized Service
Center for the cord to be replaced.
6. Service parts list
A: Item No.
B: Code No.
C: No. Used
D: Remarks
CAUTION
R
epair, modification and inspection of HiKOKI Power
Tools must be carried out by a HiKOKI Authorized
Service Center.
This Parts List will be helpful if presented with the
tool to the HiKOKI Authorized Service Center when
requesting repair or other maintenance.
In the operation and maintenance of power tools,
the safety regulations and standards prescribed in
each country must be observed.
MODIFICATION
HiKOKI Power Tools are constantly being improved
and
modified to incorporate the latest technological
advancements.
Accordingly, some parts (i.e. code numbers and/or
design) may be changed without prior notice.
01Eng_M12V2_WE 8/18/11, 10:38 AM10
Содержание
- M 12sa2 1
- M 12v2 1
- A continuación se muestran los símbolos usados para la máquina asegúrese de comprender su significado antes del uso 7
- Advertencia 7
- Avertissement les symboles suivants sont utilisés pour l outil bien se familiariser avec leur signification avant d utiliser l outil 7
- Aviso a seguir aparecem os símbolos utilizados pela máquina assimile bem seus significados antes do uso 7
- Avvertenza 7
- Di seguito mostriamo i simboli usati per la macchina assicurarsi di comprenderne il significato prima dell uso 7
- Die folgenden symbole werden für diese maschine verwendet achten sie darauf diese vor der verwendung zu verstehen 7
- Lesen sie sämtliche sicherheitshinweise und anweisungen durch wenn die warnungen und anweisungen nicht befolgt werden kann es zu stromschlag brand und oder ernsthaften verletzungen kommen 7
- Read all safety warnings and all instructions failure to follow the warnings and instructions may result in electric shock fire and or serious injury 7
- Simboli 7
- Symbole 7
- Symbolen 7
- Symboles 7
- Symbols 7
- Símbolos 7
- Waarschuwing 7
- Warning the following show symbols used for the machine be sure that you understand their meaning before use 7
- Warnung 7
- English 8
- General power tool safety warnings 8
- Original instructions 8
- Applications 9
- English 9
- Optional accesories sold separately 9
- Router safety warnings 9
- Specifications 9
- Standard accessories 9
- English 10
- How to use the router 10
- Installing and removing bits 10
- Prior to operation 10
- English 11
- Maintenance and inspection 11
- Using the optional accessories 11
- English 12
- Guarantee 12
- Allgemeine sicherheitshinweise für elektrogeräte 13
- Deutsch 13
- Übersetzung der original gebrauchsanweisung 13
- Deutsch 14
- Sicherheitswarnung für oberfräse 14
- Sonderzubehör separat zu beziehen 14
- Standardzubehör 14
- Technische daten 14
- Anwendungsbereiche 15
- Deutsch 15
- Fräsen installieren und entfernen 15
- Verwendung der oberfräse 15
- Vor inbetriebnahme 15
- Deutsch 16
- Deutsch 17
- Garantie 17
- Verwendung der sonder zubehörteile 17
- Wartung und inspektion 17
- Avertissements de sécurité généraux concernant les outils électriques 18
- Français 18
- Traduction des instructions d origine 18
- Accessoires a option vendus séparément 19
- Accessoires standards 19
- Avertissement de sécurité concernant le defonceuse 19
- Français 19
- Specifications 19
- Applications 20
- Avant la mise en marche 20
- Comment utiliser la defonceuse 20
- Français 20
- Installation et retrait des couteaux 20
- Français 21
- Entretien et contrôle 22
- Français 22
- Garantie 22
- Utilisation des accessoires en option 22
- Avvertimenti generali di sicurezza sugli utensili elettrici 23
- Italiano 23
- Traduzione delle istruzioni originali 23
- Accessori disponibili a richiesta 24
- Accessori standard 24
- Avvertimenti di sicurezza sul fresatrice verticale 24
- Caratteristiche 24
- Italiano 24
- Venduti separatamente 24
- Come si usa la frestatrice verticale 25
- Impieghi 25
- Installazione e rimozione delle punte 25
- Italiano 25
- Prima dell uso 25
- Italiano 26
- Garanzia 27
- Italiano 27
- Manutenzione e controlli 27
- Uso degli accessori opzionali 27
- Algemene veiligheidswaarschuwingen voor elektrisch gereedschap 28
- Nederlands 28
- Vertaling van de oorspronkelijke aanwijzingen 28
- Extra toebehoren los te verkrijgen 29
- Nederlands 29
- Standaard tohebehoren 29
- Technische gegevens 29
- Veiligheidswaarschuwing voor de bovenfreesmachine 29
- Het gebruik van de bovenfrees 30
- Installeren en verwijderen van freesbitjes 30
- Nederlands 30
- Toepassingsgebieden 30
- Voor het begin van het werk 30
- Nederlands 31
- Garantie 32
- Gebruik van de los verkrijgbare accessoires 32
- Nederlands 32
- Onderhoud en inspectie 32
- Advertencias de seguridad general de la herramienta eléctrica 33
- Español 33
- Traducción de las instrucciones originales 33
- Accesorios estandar 34
- Accesorios facultativos 34
- Advertencia de seguridad al utilizar el fresadora 34
- De venda por separado 34
- Español 34
- Especificaciones 34
- Antes de la puesta en marcha 35
- Aplicaciones 35
- Como usar la fresadora 35
- Español 35
- Instalación y desinstalación de brocas 35
- Español 36
- Español 37
- Garantía 37
- Mantenimiento e inspeccion 37
- Utilizacion de los accesorios opcionales 37
- Avisos gerais de segurança para a ferramenta eléctrica 38
- Português 38
- Tradução das instruções originais 38
- Acessórios de série 39
- Acessórios opcionais vendido à parte 39
- Aviso de segurança para o tupia 39
- Especificações 39
- Português 39
- Antes da operação 40
- Aplicações 40
- Como utilizar a fresadora 40
- Instalar e remover pontas 40
- Português 40
- Português 41
- Utilizar os acessórios opcionais 41
- Garantia 42
- Manutenção e inspecção 42
- Português 42
- A b c d 43
- A b c d 44
- M12sa2 44
- Hikoki power tools belgium n v s a 47
- Hikoki power tools deutschland gmbh 47
- Hikoki power tools france s a s 47
- Hikoki power tools italia s p a 47
- Hikoki power tools lbérica s a 47
- Hikoki power tools netherlands b v 47
- Hikoki power tools u k ltd 47
- Hikoki power tools österreich gmbh 47
- 2018 naoto yamashiro european standard manager 48
- A nakagawa corporate offi cer 48
- Code no c99145275 m printed in malaysia 48
- Deutsch español 48
- English nederlands 48
- Français português 48
- Head offi ce in japan 48
- Hikoki power tools deutschland gmbh 48
- Italiano 48
- Koki holdings co ltd 48
- Representative offi ce in europe 48
- Shinagawa intercity tower a 15 1 konan 2 chome minato ku tokyo japan 48
- Siemensring 34 47877 willich germany 48
Похожие устройства
- Hikoki M 12SA2 Инструкция по эксплуатации
- Hikoki SV 13YB Инструкция по эксплуатации
- Hikoki SV 13YA Инструкция по эксплуатации
- Hikoki SV 12SH Инструкция по эксплуатации
- Hikoki SV 12SG Инструкция по эксплуатации
- Hikoki SV 12SD Инструкция по эксплуатации
- Hikoki SP 18VA Инструкция по эксплуатации
- Hikoki SB 8V2 Инструкция по эксплуатации
- Hikoki GP 3V Инструкция по эксплуатации
- Hikoki GP 2S2 Инструкция по эксплуатации
- Hikoki W 6V4 Инструкция по эксплуатации
- Tech ST-81 Инструкция по эксплуатации
- Tech ST-81 zPID Инструкция по эксплуатации
- Tech ST-880 zPID Инструкция по эксплуатации
- Hikoki CS 45Y Инструкция по эксплуатации
- Tech ST-37N RS Инструкция по эксплуатации
- Hikoki CS 40Y Инструкция по эксплуатации
- Tech ST-48 Инструкция по эксплуатации
- Tech ST-480 Инструкция по эксплуатации
- Tech ST-480 zPID Инструкция по эксплуатации