Beko FSE67500GS [15/64] Future transportation

Содержание

obey this instruction may cause operational problems Power cable must not be longer than 2m because of safety reasons and invalidate the product warranty __________________ Additional protection by a residual current circuit breaker is recommended Push the product towards the kitchen wall Adjusting the feet of oven 2 Open the terminal block cover with a screwdriver Vibrations during use may cause cooking vessels 3 Insert the power cable through the cable clamp to move This dangerous situation can be below the terminal and secure it to the main body avoided if the product is level and balanced with the integrated screw on cable clamping For your own safety please ensure the product is component 4 Connect the cables according to the supplied diagram level by adjusting the four feet at the bottom by turning left or right and align level with the work top Final check 1 Reconnect the product to the mains 2 Check electrical functions Future Transportation Keep the product s original carton and transport the product in it Follow the instructions on the carton If you do not have the original carton pack the product in bubble wrap or thick cardboard and tape it securely To prevent the wire grill and tray inside the oven from damaging the oven door place a strip of cardboard onto the inside of the oven door that lines up with the position of the trays Tape the oven door to the side walls Do not use the door or handle to lift or move the Do not place any objects onto the product and move it in upright position 5 After completing the wire connections close the terminal block cover 6 Route the power cable so that it will not contact the product and get squeezed between the Check the general appearance of your product for any damages that might have occurred during transportation product and the wall 15 EN

Скачать