Nilfisk Щетка City Ranger 2250 E70101143 [20/28] Service and maintenance

Operator’s Manual City Ranger 2250 Weed brush

Service and maintenance

3.3 Adjusting the vacuum nozzle

- continued -

When changing the brush or rubber prole on the vacuum

nozzle, check the angle.

1. Place the brush at on the ground.

2. Loosen the bolts, two on each side. (Picture 1)

3. Adjust the angle so that distance X is the same in front

of and behind the wheel. (Picture 2)

If distance X exceeds 4 mm.

4. Remove the bolt. (Picture 3)

5. Move the wheel to the required position, typically one

hole up, i.e. from pos. 1 to pos. 2, etc. (Picture 4)

6. Repeat on the opposite side.The wheels must be tted

in the same position on each side.

7. Adjust the angle so there is the same distance (X) in

front and behind the wheel (Picture 2) and tighten the

bolts on both sides. (Picture 1)

Parallel

Wheel bolt

Pos 1, Pos 2, Pos 3, Pos 4