IKA A 10 basic 0004020700 [23/100] Accessories

Error codes

Accessories

A10.1 Standard beater

A10.3 Hard metal cutter

Warranty

In accordance with IKA

warranty conditions, the war-

ranty period is 24 months. For claims under the warranty

please contact your local dealer. You may also send the

machine direct to our factory, enclosing the delivery in-

voice and giving reasons for the claim. You will be liable

for freight costs.

The fault is shown by an error code in the LED display (C) as following if the error occurs.

Proceed as follows in such cases:

Switch off the device using the main switch

Carry out corrective measures

Restart the instrument

Error code

Cause Effect Solution

– – – The cap is not closed properly instrument

does not start

- Close the cover properly

E3 Temperature inside instrument is too high motor off - Switch off the instrument and allow it to

cool down

E4 Motor blockage or overload motor off - Switch off the instrument

Decrease the motor’s load and reduce the

material to be ground

E25 Safety relay fault motor off - Send the instrument for repair

E86 Voltage is too low motor off - Switch off the instrument

- Check the Mains voltage

If the actions described fails to resolve the fault or another error code is displayed then take one of the following steps:

- Contact the service department

- Send the instrument for repair, including a short description of the fault.

A10.2 Star-shaped knife

A10.4 Grinding chamber reduction

The warranty does not cover worn out parts, nor does

it apply to faults resulting from improper use, insucient

care or maintenance not carried out in accordance with

the instructions in this operating manual.