CMI C-B-40 [36/107] Disposal

CMI C-B-40 [36/107] Disposal
36
GB
Storage, transportation
Storage
Transportation
Parts that extend beyond the device should be
removed.
When dispatching, try to use the original
packaging, if possible.
When placed out of operation (3 months or lon-
ger)
Remove the fuel from the tank prior to longer periods
of rest.
Empty the tank.
Start the motor and allow to run until the motor
switches itself off.
Transporting the device in a motor vehicle
Allow for the device to cool down.
Empty the tank.
Secure the device from sliding and tipping.
Disposal
Disposing of the product
Do not dispose of the product with the
household waste! Proper disposal is
mandatory. Information can be obtained
from the responsible waste disposal faci-
lity.
Disposing of packaging
The packaging consists of cardboard and appropri-
ately marked films, which can be recycled.
Take these materials to a recycling facility.
Troubleshooting
What to do when something doesn't work …
In many cases, small defects can lead to a malfunc-
tion. You will usually be able to deal with these your-
self. Please refer to the table below before contac-
ting your local OBI market. This may save you a lot of
effort and quite often money.
WARNING! Risk of injury! Store the
device in such a way that is cannot be
activated by unauthorised persons.
Ensure that no one is able to hurt themsel-
ves on the stored unit.
CAREFUL! Machine damage! Do not
stored unprotected in a damp environ-
ment.
CAUTION! Risk of fire hazard as well as
environmental damage! Avoid damage
caused by leaking fuel: Empty the tank
according to regulations before disposal.
DANGER! Risk to life! Unprofessional
repairs may mean that your unit will no
longer operate safely. This endangers you
and your environment.
Error/Fault Cause Remedy
The motor does not start Tank empty? Fill with fuel.
Ignition switch deactivated? Activate the ignition switch.
Ignition cable connector not
plugged on?
Firmly push the connector onto
the spark plug.
Excess fuel in
combustion chamber?
Remove the spark plug, dry the
electrode and start the motor.
Spark plug contaminated? Clean the spark plug.
Gap between the electrodes on
the spark plug is too large?
Set the gap to 0.7--0.8 mm.
Incorrect fuel? Empty the tank and fill with the
correct fuel.
Is the spark plug defective? Replace the spark plug.
The motor operates with interrup-
tions.
Cold start lever set to the wrong
position?
Check the position.
468303_304_Rasenmaeher_Benzin.book Seite 36 Donnerstag, 5. November 2015 3:55 15

Содержание