![Tascam CD-9010CF [22/56] Playing a track once from the beginning](/img/pdf.png)
Tascam CD-9010CF [22/56] Playing a track once from the beginning
![Tascam CD-9010CF [22/56] Playing a track once from the beginning](/views2/1553185/page22/bg16.png)
22
TASCAM CD-9010CF
4 – Playback
Playing a track once from the beginning
Follow these steps to select and check the desired track
(monitoring playback), and then play it through the main
outputs (online playback). These procedures assume that all
menu items are at their default settings.
1. Press the PLAY MODE button to select single mode.
Press the
•
PLAY MODE button as many times as
necessary until the
SINGLE
playback mode indicator
appears on the Home Screen.
2. Press the MENU button to open the
MENU
screen, and set
AUTO CUE
in the
PLAY
menu to
ON
.
3. Press the HOME button to open the Home Screen.
4. Use the TRACK .// buttons to select a track for
playback.
The unit enters playback standby at the position where
•
an audio signal is detected in the selected track (and
the STANDBY button lights).
NOTE
When the playback mode is set to CONTINUE or SINGLE, you can
use the number buttons (0 through 9) to select tracks. Enter two
digits for audio CDs or three digits for data CDs or CF cards. (For
example, press the 0 button followed by the 2 button to select
track 2 on an audio CD.)
5. To check the playback signal, press the MONITOR button
to start monitoring playback (the MONITOR button
lights).
In addition to using an external monitoring system, you
•
can also monitor the playback signal using headphones
connected to the unit's PHONES jack.
6. After checking the signal, press the STANDBY button.
The playback position is set to the point where the
•
track starts and the unit enters playback standby mode
(the STANDBY button lights).
7. Press the PLAY button to start online playback.
When the track ends, the unit re-enters playback
•
standby.
Press the STOP button to stop playback immediately.
•
Playing a track from the middle
Follow these steps to find a point in the middle of a track and
start playback from the main outputs from that point.
1. When stopped or during playback standby, you can
search within a track using the SEARCH m/, buttons
to locate a desired point and put the unit in playback
standby there. (See "Searching within tracks" on page 23.)
2. At the desired playback point, press the MONITOR button
to start monitoring playback and check it.
3. After checking, press the STANDBY button to return to
the point set earlier and start online playback standby
(STANDBY button lights).
To adjust the set point, return to step 1.
•
4. Press the PLAY button to start online playback.
When the track ends, the unit will enter playback standby
mode.
NOTE
Press the STOP button to stop playback immediately.
Automatic cue point memory (last cue)
When you start monitoring playback from a stopped or playback
standby state, the starting position is automatically memorized
as a cue point.
The most recently added cue point is the "last cue point". Press
the STANDBY button to locate to the last cue point (where
monitoring playback last started) and enter playback standby.
NOTE
When using a TASCAM RC-9010/RC-9010S remote control
•
(sold separately), you can assign automatic cue points to
the number (0–9) buttons.
In jog mode, pressing the
•
STANDBY button saves the
current position as a cue point.
Содержание
- Cd 9010cf 1
- Cd solid state player 1
- Owner s manual 1
- Important safety information 2
- Warning to prevent fire or shock hazard do not expose this appliance to rain or moisture 2
- For canada 3
- Safety precautions 3
- Safety precautions 4
- Contents 5
- Introductio 5
- Names and functions of part 5
- Playbac 5
- Preparation 5
- Program and cue playbac 5
- Contents 6
- Managing cf card 6
- Message lis 6
- Operation using a computer keyboar 6
- Other settings and information displa 6
- Specification 6
- Troubleshootin 6
- Using the remote connector 6
- Working with files and folder 6
- Caution 7
- Conventions used in this manual 7
- Features 7
- Included items 7
- Introduction 7
- About cf cards 8
- Beware of condensation 8
- Card formatting 8
- Cleaning the unit 8
- Connecting the power 8
- Intellectual property rights 8
- Introduction 8
- Precautions for placement and use 8
- Precautions for use 8
- About discs 9
- Handling of compact discs 9
- Introduction 9
- Caution 10
- Front panel 10
- Names and functions of parts 10
- Names and functions of parts 11
- Caution 12
- Names and functions of parts 12
- Rear panel 12
- Home screen 13
- Names and functions of parts 13
- Menu structure 14
- Names and functions of parts 14
- Names and functions of parts 15
- Menu operation basics 16
- Menu operation procedures 16
- Names and functions of parts 16
- Caution 17
- Preparations 17
- Setting the date and time 17
- Turning the power off 17
- Turning the power on and off 17
- Adjusting display and indicator brightness 18
- Adjusting display contrast 18
- Adjusting the display 18
- Preparations 18
- Caution 19
- Ejecting cf cards 19
- Inserting and ejecting cf cards 19
- Inserting cf cards 19
- Preparations 19
- Using the security screw 19
- Caution 20
- Connecting headphones 20
- Preparations 20
- Setting the panel lock function 20
- Monitoring and online playback 21
- Monitoring playback 21
- Online playback 21
- Playback 21
- Setting the playback mode 21
- Automatic cue point memory last cue 22
- Playback 22
- Playing a track from the middle 22
- Playing a track once from the beginning 22
- Auto cue function 23
- Operation after selection of a track 23
- Playback 23
- Searching within tracks 23
- Selecting tracks 23
- Setting the playback point 23
- Auto ready function 24
- Incremental playback function 24
- Playback 24
- Online back cue function 25
- Play key function setting 25
- Playback 25
- Monitor play stby function 26
- Online play stby function 26
- Ordinary repeat playback 26
- Playback 26
- Repeat playback 26
- Checking the ends of tracks 27
- Eom functions 27
- How to use the end check function 27
- How to use the eom 27
- Playback 27
- Setting eom tally output trigger 27
- Setting the amount of time checked 27
- Pitch control playback 28
- Pitch time fit function 28
- Playback 28
- Setting the pitch control value 28
- Turning pitch control playback on off 28
- Adding tracks to a program 29
- Program and cue playback 29
- Program menu operation 29
- Program playback 29
- Clearing a program 30
- Moving tracks within a program 30
- Program and cue playback 30
- Removing tracks from a program 30
- Adding cue points 31
- Cue point playback 31
- Exporting programs 31
- Importing programs 31
- Program and cue playback 31
- Using the cue menu 31
- Clearing a cue point 32
- Clearing the cue list 32
- Program and cue playback 32
- Editing cue point names 33
- Editing text 33
- Program and cue playback 33
- Automatic cue point loading options 34
- Exporting cue lists 34
- Importing cue lists 34
- Program and cue playback 34
- File operations 35
- Icons on the browse screen 35
- Navigating the browse screen 35
- Opening the browse screen 35
- Working with files and folders 35
- Editing folder names cf cards 36
- Folder operations 36
- Working with files and folders 36
- Deleting folders and files cf cards 37
- Editing file names cf cards 37
- Working with files and folders 37
- Creating new folders cf cards 38
- Data cd structure 38
- File and folders on cf cards and data cds 38
- Working with files and folders 38
- Formatting cf cards full format 39
- Formatting cf cards quickly 39
- Managing cf cards 39
- Managing cf cards 40
- Ripping cd tracks to cf cards 40
- Other settings and information display 41
- Setting the analog reference level 41
- Setting the digital reference level 41
- Adjusting r l analog reference levels 42
- Other settings and information display 42
- Setting the online function 42
- Master clock and digital output combinations 43
- Mono mix setting 43
- Other settings and information display 43
- Setting the master word clock 43
- Fail safe function setting 44
- Other settings and information display 44
- Setting the level meter display type 44
- Exporting menu settings 45
- Importing menu settings 45
- Monitoring point setting 45
- Monitoring point settings 45
- Muting monitoring when online 45
- Other settings and information display 45
- Other settings and information display 46
- Restoring the factory settings 46
- Viewing media information 46
- Viewing system information 46
- Operation using a computer keyboard 47
- Setting the keyboard language 47
- Using a keyboard to input text 47
- Fader start function setting 48
- Fader stop function setting 48
- Fader use setting 48
- Using the remote connectors 48
- Using the serial connector 48
- Fader stop action setting 49
- Setting the fader scale used 49
- Transmission speed setting 49
- Using the remote connectors 49
- Parallel port 3 pin 13 pin setting 50
- Using the parallel connector 50
- Using the remote connectors 50
- Error messages 51
- Message list 51
- Operation messages 51
- Warning messages 51
- Changed settings are not saved 52
- I hear noise 52
- Media is not detected 52
- No sound 52
- Power does not turn on 52
- Troubleshooting 52
- Unable to playback a file 52
- Unit cannot be controlled 52
- When editing text name full appears 52
- Analog audio inputs and outputs 53
- Audio performance 53
- Control inputs and outputs 53
- Digital audio output 53
- Inputs and outputs 53
- Media and file formats 53
- Specifications 53
- Backup memory 54
- Dimensional drawings 54
- General 54
- Specifications 54
- Cd 9010cf 56
- Contact information 56
- Teac america inc 56
- Teac canada ltd 56
- Teac corporation 56
- Teac europe gmbh 56
- Teac mexico s a de c v 56
- Teac uk limited 56
Похожие устройства
- Tascam RC-9010S Руководство пользователя
- Tascam CD-A580 Руководство пользователя
- Tascam CD-RW900MKII Руководство пользователя
- Tascam CD-RW901MKII Руководство пользователя
- Tascam CG-1000 Руководство пользователя
- Tascam CG-1800 Руководство пользователя
- Tascam CG-1800 Приложение
- Tascam CG-1000 Приложение
- Tascam CG-2000 Приложение
- Tascam CG-2000 Руководство пользователя
- Tascam DA-3000 Руководство пользователя
- Tascam DA-6400 Приложение для прошивки v2.10
- Tascam DA-6400 Приложение для прошивки v2.20
- Tascam DA-6400 Руководство по эксплуатации
- Tascam DA-6400 Руководство пользователя
- Tascam DA-6400 Приложение
- Tascam DA-6400dp Приложение
- Tascam DA-6400dp Руководство пользователя
- Tascam DP-006 Руководство пользователя
- Tascam DP-008EX Руководство пользователя версия В