Qtech QSW-3900-48-SFP-DC [211/245] Show username

QTECH Software Configuration Manual

16-210

Step Command Description

1 username username privilege privilege<0-15> Modify user’s privilege.

2 show username Check configuration.

3 exit Exit to user mode

4 copy running-config startup-config Save the configuration

& Note :

Username : means the name of the existed user to be modified which must be 1 to 32 printable characters without '/',' :

','*','?','\\','<','>','|','"'. If the entered username is not existed, add it to be the new one.

Level : means the priority of the existed user (except the Super-administrator) to be modified which is the number between 0 and 15. 0

and 1 mean the normal user and 2 to 15 mean the administrator.

Caution : Case-sensitive is for password but not username.

Example :

!Modify the privilege of the existed user "green" to be 1 and its password to be 1234

QTECH (config)#username green privilege 0 password 0 1234

16.4.4 Delete User

Only Super-administrator "admin" can add and delete user in global configuration mode. Enter global configuration

mode (how to enter global configuration mode refers to the first 2 steps in Table 4-1) before following the below

steps :

Table 4-4 Delete user

Step Command Description

1 no username username Delete user.

2 show username Check configuration.

3 exit Exit to user mode

4 copy running-config startup-config Save the configuration

& Note :

Username : means the name of the user to be deleted.

When deleting a user which is used, it will be disconnected before delete it.

Example :

!Delete user "green"

QTECH(config)#no username green

16.4.5 Show users

After configuration, you can use following steps to check it. Any configuration mode is permitted.

Table 4-5 Show users

Step Command Description

1 show username Show specific user.

2 show users Show users’ log. At most 5

users are permitted on line at

the same time.