Qtech QSW-8200-28T-POEAC- DC [51/74] Distribute list

User Manual

Chapter 4. Commands for RIPng 51

www.qtech.ru

from the protocol.

 Example:

 Switch#config terminal

 Switch(config)#router rip

 Switch(config-router)#distance 8 fe80:1111::4200:21ff:fe00:11 mylist

4.5 distribute-list

 Command: distribute-list {access-list-name> |prefix<prefix-list-name>} {in|out}

[<ifname>|vlan <vlan-id>]

 no distribute-list {access-list-name> |prefix<prefix-list-name>} {in|out} [<ifname>|vlan

<vlan-id>]

 Function: This command uses access-list or prefix-list to filter the route renews

messages sent and received. The “no distribute-list {access-list-name> |prefix<prefix-

list-name>} {in|out} [<ifname>|vlan <vlan-id>]” command cancels this filter function.

 Parameter: <access-list-name> is the name or access-list number to be applied. <prefix-

list-name> is the name of the prefix-list to be applied. <ifname> specifies the name of

interface to be applied with route filtering.

 Default: Function disabled by RIPng by default.

 Command Mode: Router mode

 Usage Guide: The filter will be applied to all interfaces if no specific interface is set.

 Example: Switch#config terminal

 Switch(config)#router ipv6 rip

 Switch(config-router)#distribute-list prefix myfilter in Vlan1

4.6 debug ipv6 rip

 Command: debug ipv6 rip [events| nsm| packet [recv|send][detail]| all]

 no debug ipv6 rip [events| nsm| packet [recv|send][detail]| all]

 Function: For opening various debugging switches of RIPng, showing various debugging

messages. The “no debug ipv6 rip [events| nsm| packet [recv|send][detail]| all]”

command closes the corresponding debugging switch.

 Parameter: events shows the debugging message of RIPng events

 nsm shows the communication messages between RIPng and NSM.

 packet shows the debugging messages of RIPng data packets

 recv shows the messages of the received data packets