Qtech QSW-8200-28T-POEAC- DC [9/74] Match community

User Manual

Chapter 1. Commands for Routing Policy 9

www.qtech.ru

1.5 match community

 Command: match community <community-list-name | community-list-num> [exact-

match]

 no match community [<community-list-name | community-list-num>

[exact-match]]

 Function: Configure the community attributes of BGP routing messages. The “no match

community [<community-list-name | community-list-num > [exact-match]]” command

deletes this configuration.

 Parameter: <community-list-name > is the name of the community-list, <community-

list-num > is the community-list sequence number, ranging between 1～99 (Standard

ACL) or 100～199 (Extended ACL), [exact-match] means precise matching.

 Command Mode: route-map mode

 Usage Guide: This command matches the community attributes of the BGP routing

message following the rules specified in the community list. If the matching succeeded,

then the “permit” or “deny” action in the route-map is performed.

 Example:

 Switch#config terminal

 Switch(config)#route-map r1 permit 5

 Switch(config-route-map)#match community 100 exact-match

1.6 match interface

 Command: match interface <interface-name >

 no match interface [<interface-name >]

 Function: Configure to match the interfaces. The “no match interface [<interface-name

>]” deletes this configuration.

 Parameter: “<interface-name >” is the name of the interface.

 Command Mode: route-map mode

 Usage Guide: This command matches according to the next-hop messages in the route.

If the matching succeeded, then the “permit” or “deny” action in the route-map is

performed. This command is only used in RIP and OSPF protocols.

 Example:

 Switch#config terminal

 Switch(config)#route-map r1 permit 5

 Switch(config-route-map)#match interface vlan1

1.7 match ip

 Command: match ip <address | next-hop> <ip-acl -name | ip-acl -num | prefix-list list-

name>