Qtech QSW-8200-28T-POEAC- DC [61/74] Show ipv6 rip database

User Manual

Chapter 4. Commands for RIPng 61

www.qtech.ru

 R 2000:1:1::/64 :: Vlan2 1 0

 R 2001:1:1::/64 fe80::203:fff:fe01:257c Vlan2 2 0 02:40

 R 3000:1:1::/64 :: Vlan10 1 0

 R 3010:1:1::/64 :: -- 1 0

 Amongst R stands for RIP route, namely a RIP route with the destination network

address 2001:1:1::/64, next-hop address at fe80::203:fff:fe01:257c. It is learnt from the

Ethernet port VLAN2 with a metric value of 2, and still has 2 minutes 40 seconds before

time out.

 Equal Command: show ipv6 rip database

4.24 show ipv6 rip database

 Command: show ipv6 rip database

 Function: Show messages related to RIPng database.

 Command Mode: Admin mode

 Example: Switch#show ipv6 rip database

 Equal Command: show ipv6 rip

4.25 show ipv6 rip aggregate

 Command: show ipv6 rip aggregate

 Function: To display the information of IPv6 aggregation route.

 Parameter: None.

 Command Mode: Admin and Configuration Mode.

 Default: None.

 Usage Guide: This command is used to display which interface the aggregation route be

configured, Metric, Count, Suppress and so on, if configured under global mode, then

the interface display “----”. “Metric” is metric. “Count” is the number of learned

aggregation routes. “Suppress” is the times of aggregation.

 Example: To display the information of IPv6 aggregation route.

 Switch(config-router)#show ipv rip agg

 Aggregate information of ripng

 Network Aggregated Ifname Metric Count Suppress

 2001::/16 Vlan1 1 2 0