Beurer HLE 40 [10/52] Care and storage

10

• If you want to use a sunbed within 24 hours of carrying out hair removal, protect your skin by

using suncream.

• Apply the wax in the direction of hair growth, ensuring that the roller rotates and that the device is held at

a 45°C angle to prevent wax leaking out.

• Insert the applicator onto the base station between uses to ensure that the wax retains its temperature

and does not leak out.

• The fabric strip must be laid on the skin immediately after the wax is applied. Lay the strip in the direc-

tion of hair growth, covering the entire area, to ensure that the strip sticks to the wax effectively.

ridge. To do so, remove the cartridge from the chamber with caution, in order to avoid getting burnt, and

insert this into the applicator.

CAUTIon

• Only use the warm wax hair remover following the method described in this manual. Only use

beurer wax cartridges.

• Do not treat any sensitive areas such as eyebrows, birthmarks, warts, open wounds, cuts, burns etc.

• This device is not suitable for persons who suffer from diabetes, varicose veins or circulation

problems, or persons who are prone to infections.

• Do not use the wax on irritated skin. Do not apply the wax to areas to which other substances

have already been applied.

wax roller along a fabric strip until the wax roller rotates completely.

• Once you have completed the treatment, place the base device on the base station and leave the wax to

cool. Always position the device upright, to ensure that the wax does not leak out.

5. Care and storage

WArnInG

• Disconnect the device before cleaning it.

• Only clean the appliance in the manner specified. Fluid must never be allowed to enter into the

device or accessories.

• Do not use the device again until it is completely dry.

• Do not clean the device in the dishwasher.

*Commercially available or from the corresponding service address (according to the service address list)