![Gigabyte GA-78LMT-USB3 R2 (rev. 1.0) [23/35] Amd apm master mode amd application power management](/img/pdf.png)
Gigabyte GA-78LMT-USB3 R2 (rev. 1.0) [23/35] Amd apm master mode amd application power management
![Gigabyte GA-78LMT-USB3 R2 (rev. 1.0) [23/35] Amd apm master mode amd application power management](/views2/1669478/page23/bg17.png)
- 23 -
& AMD C6 Support
(Note)
Allows you to determine whether to let the CPU enter C6 mode in system halt state. When enabled, the
CPU core frequency will be reduced during system halt state to decrease power consumption. The C6
state is a more enhanced power-saving state than C1. (Default: Enabled)
& Virtualization
Virtualization enhanced by Virtualization Technology will allow a platform to run multiple operating systems
and applications in independent partitions. With virtualization, one computer system can function as multiple
virtual systems. (Default: Disabled)
& AMD K8 Cool&Quiet control
Auto Lets the AMD Cool'n'Quiet driver dynamically adjust the CPU clock and VID to reduce
heat output from your computer and its power consumption. (Default)
Disabled Disables this function.
& AMD APM Master Mode (AMD Application Power Management)
(Note)
Auto Lets the BIOS automatically congure this setting. (Default)
Enabled Dynamically monitors the power consumption of the CPU cores and automatically
optimizes the CPU to its best performance level.
Disabled Disables this function.
& CPU core Control
Allows you to determine whether to manually enable/disable CPU cores.
Auto Lets the BIOS to enable all CPU cores (number of cores available depends on the CPU
being used). (Default)
Manual Allows you to individually enable/disable CPU Core.
& One Core Per Compute Unit
(Note)
Enables or disables one core of each Compute Unit. If set to Enabled, each Compute Unit will operate
with only one core and the CPU core 3-4 items will become uncongurable. This item is congurable only
when CPU core Control is set to Manual. (Default: Disabled)
& CPU core 1-2
(Note)
This setting is xed. CPU Core 1-2 is always enabled.
& CPU core 3-4
(Note)
Allows you to enable/disable each Compute Unit respectively. If set to Disabled, both cores of the CPU
Unite will be disabled. This item is congurable only when One Core Per Compute Unit is set to Disabled.
(Default: Enabled)
& Hard Disk Boot Priority
Species the sequence of loading the operating system from the installed hard drives.
Use the up or down arrow key to select a hard drive, then press the plus key <+> (or <PageUp>) or the
minus key <-> (or <PageDown>) to move it up or down on the list. Press <Esc> to exit this menu when
nished.
& EFI CD/DVD Boot Option
Set this item to EFI if you want to install the operating system to a hard drive larger than 2.2 TB. Make sure
the operating system to be installed supports booting from a GPT partition, such as Windows 7 64-bit and
Windows Server 2003 64-bit. Auto lets the BIOS automatically congure this setting depending on the
hard drive you install. (Default: Auto)
& First/Second/Third Boot Device
Species the boot order from the available devices. Use the up or down arrow key to select a device and
press <Enter> to accept. Options are: LS120, Hard Disk, CDROM, ZIP, USB-FDD, USB-ZIP, USB-CDROM,
USB-HDD, Legacy LAN, Disabled.
(Note) This item is present only when you install a CPU that supports this feature.
Содержание
- Ga 78lmt usb3 r2 1
- Rev 1001 1
- User s manual 1
- Copyright 2
- Disclaimer 2
- Identifying your motherboard revision 2
- Chapter 1 hardware installation 3
- Chapter 2 bios setup 6 3
- Chapter 3 appendix 0 3
- Ga 78lmt usb3 r2 motherboard layout 3
- Table of contents 3
- Box contents 4
- Ga 78lmt usb3 r2 4
- Ga 78lmt usb3 r2 motherboard 4
- Ga 78lmt usb3 r2 motherboard layout 4
- Motherboard driver disk 5 two sata cables 4
- User s manual 5 i o shield 4
- 1 installation precautions 5
- Chapter 1 hardware installation 5
- 2 product specifications 6
- 2 productspecifications 6
- 3 installing the cpu 8
- 4 installing the memory 8
- Dualchannelmemoryconfiguration 8
- Installing the cpu 8
- 5 installing an expansion card 9
- 6 back panel connectors 9
- D sub port 9
- Dvi d port 9
- Hdmi port 9
- Ps 2 keyboard mouse port 9
- Usb 2 1 port 9
- A dual displayconfigurations 10
- B playback of blu ray discs 10
- Line in blue 10
- Line out green 10
- Mic in pink 10
- Rj 45 lan port 10
- Usb 3 gen 1 port 10
- 7 internal connectors 11
- 2 atx_12v atx 2x4 12v power connector and 2x12 main power connector 12
- 4 cpu_fan sys_fan fan headers 12
- All fan headers on this motherboard are 4 pin most fan headers possess a foolproof insertion design when connecting a fan cable be sure to connect it in the correct orientation the black connector wire is the ground wire the speed control function requires the use of a fan with fan speed control design for optimum heat dissipation it is recommended that a system fan be installed inside the chassis 12
- The 12v power connector mainly supplies power to the cpu if the 12v power connector is not connected the 12v power connector mainly supplies power to the cpu if the 12v power connector is not connected the computer will not start 12
- With the use of the power connector the power supply can supply enough stable power to all the components on the motherboard before connecting the power connector first make sure the power supply is turned off and all devices are properly installed the power connector possesses a foolproof design connect the power supply cable to the power connector in the correct orientation 12
- Bat battery 13
- Ide ide connector 13
- Sata2 0 1 2 3 4 5 sata 3gb s connectors 13
- The battery provides power to keep the values such as bios configurations date and time information in the cmos when the computer is turned off replace the battery when the battery voltage drops to a low level or the cmos values may not be accurate or may be lost 13
- The ide connector supports up to two ide devices such as hard drives and optical drives before attaching the ide cable locate the foolproof groove on the connector if you wish to connect two ide devices remember to set the jumpers and the cabling according to the role of the ide devices for example master or slave for information about configuring master slave settings for the ide devices read the instructions from the device manufacturers 13
- The sata connectors conform to sata 3gb s standard and are compatible with sata 1 gb s standard each sata connector supports a single sata device the amd south bridge supports raid 0 raid 1 raid 10 and jbod refer to chapter 3 configuring a raid set for instructions on configuring a raid array 13
- Acz_det 9 line2_l 14
- Audio signals will be present on both of the front and back panel audio connections simultaneously 14
- Ci chassis intrusion header connects to the chassis intrusion switch sensor on the chassis that can detect if the chassis cover has been removed this function requires a chassis with a chassis intrusion switch sensor 14
- Connect the power switch reset switch speaker chassis intrusion switch sensor and system status indicator on the chassis to this header according to the pin assignments below note the positive and negative pins before connecting the cables 14
- Connects to the power status indicator on the chassis front panel the led is on when the system is operating the led keeps blinking when the system is in s1 sleep state the led is off when the system is in s3 s4 sleep state or powered off s5 14
- F_audio front panel audio header 14
- F_panel front panel header 14
- For ac 97 front panel audio pin no definition pin no definition 14
- For hd front panel audio pin no definition pin no definition 14
- Gnd 7 faudio_jd 14
- Gnd 7 nc 14
- Hd hard drive activity led connects to the hard drive activity led on the chassis front panel the led is on when the hard drive is reading or writing data 14
- Line out r 10 nc 14
- Line2_r 10 sense 14
- Mic 6 nc 14
- Mic power 8 no pin 14
- Mic2_l 6 sense 14
- Mic2_r 8 no pin 14
- Nc 9 line out l 14
- Nc no connection 14
- Pled pwr_led power led 14
- Pw power switch connects to the power switch on the chassis front panel you may configure the way to turn off your system using the power switch refer to chapter 2 bios setup power management setup for more information 14
- Res reset switch connects to the reset switch on the chassis front panel press the reset switch to restart the computer if the computer freezes and fails to perform a normal restart 14
- S1 blinking 14
- S3 s4 s5 off 14
- Some chassis provide a front panel audio module that has separated connectors on each wire instead of a single plug for information about connecting the front panel audio module that has different wire assignments please contact the chassis manufacturer 14
- Speak speaker connects to the speaker on the chassis front panel the system reports system startup status by issuing a beep code one single short beep will be heard if no problem is detected at system startup if a problem is detected the bios may issue beeps in different patterns to indicate the problem 14
- System status led 14
- The front panel audio header supports hd audio by default 14
- The front panel audio header supports high definition audio hd and ac 97 audio you may connect your chassis front panel audio module to this header make sure the wire assignments of the module connector match the pin assignments of the motherboard header incorrect connection between the module connector and the motherboard header will make the device unable to work or even damage it 14
- The front panel design may differ by chassis a front panel module mainly consists of power switch reset switch power led hard drive activity led speaker and etc when connecting your chassis front panel module to this header make sure the wire assignments and the pin assignments are matched correctly 14
- Com serial port header 15
- F_usb1 f_usb2 usb 2 1 headers 15
- F_usb30 usb 3 gen 1 header 15
- Spdif_o s pdif out header 15
- The com header can provide one serial port via an optional com port cable for purchasing the optional com port cable please contact the local dealer 15
- The header conforms to usb 3 gen 1 and usb 2 specification and can provide two usb ports for purchasing the optional 3 front panel that provides two usb 3 gen 1 ports please contact the local dealer 15
- The headers conform to usb 2 1 specification each usb header can provide two usb ports via an optional usb bracket for purchasing the optional usb bracket please contact the local dealer 15
- This header supports digital s pdif out and connects a s pdif digital audio cable provided by expansion cards for digital audio output from your motherboard to certain expansion cards like graphics cards and sound cards for example some graphics cards may require you to use a s pdif digital audio cable for digital audio output from your motherboard to your graphics card if you wish to connect an hdmi display to the graphics card and have digital audio output from the hdmi display at the same time for information about connecting the s pdif digital audio cable carefully read the manual for your expansion card 15
- Bios is a windows based utility that searches and downloads the latest version of bios from the internet and updates the bios 16
- Chapter 2 bios setup 16
- Clr_cmos clear cmos jumper 16
- Key during the post when the power is turned on to upgrade the bios use either the gigabyte q flash or bios utility q flash allows the user to quickly and easily upgrade or back up bios without entering the operating system 16
- Lpt parallel port header 16
- The lpt header can provide one parallel port via an optional lpt port cable for purchasing the optional lpt port cable please contact the local dealer 16
- Use this jumper to clear the bios configuration and reset the cmos values to factory defaults to clear the cmos values use a metal object like a screwdriver to touch the two pins for a few seconds 16
- 1 startup screen 17
- Keys for the main menu only 17
- 2 mb intelligent tweaker m i t 18
- Allows you to determine whether to allocate system memory for the onboard graphics controller 18
- Allows you to determine whether to manually set the vga core clock default auto 18
- Auto bios automatically determines the primary display port for output depending on to which port the display device is connected d sub dvi d or d sub hdmi default 18
- D sub dvi sets the d sub dvi d as the graphics display 18
- D sub hdmi sets the d sub hdmi as the graphics display 18
- Disabled disables the onboard graphics controller 18
- Enables or disables the surround view function this option is configurable only when init display first under advanced bios features is set to peg and an amd graphics card is installed default disabled 18
- Frame buffer size is the total amount of system memory allocated solely for the onboard graphics controller ms dos for example will use only this memory for display options are auto default 128mb 256mb 512mb 1024mb 18
- Igxconfiguration 18
- Internal graphics mode 18
- Onboard vga output connect 18
- Specifies the graphics display of the onboard graphics output from the d sub dvi d or d sub hdmi 18
- Surround view 18
- Uma allocates memory for the onboard graphics controller from the system memory default 18
- Uma frame buffer size 18
- Vga core clock control 18
- Whether the system will work stably with the overclock overvoltage settings you made is dependent on your overall system configurations incorrectly doing overclock overvoltage may result in damage to cpu chipset or memory and reduce the useful life of these components this page is for advanced users only and we recommend you not to alter the default settings to prevent system instability or other unexpected results inadequately altering the settings may result in system s failure to boot if this occurs clear the cmos values and reset the board to default values 18
- Core performance boos 19
- Cpb rati 19
- Cpu clock ratio 19
- Cpu frequency mhz 19
- Cpu host clock control 19
- Cpu northbridge freq 19
- Ht link frequency 19
- Ht link width 19
- Memory clock 19
- Pcie clock mhz 19
- Set memory clock 19
- Turbo cp 19
- Vga core clock mhz 19
- 0 v 0 v the adjustable range is from 0 v to 0 v 21
- 1 00v 1 00v the adjustable range is from 1 00v to 1 00v 21
- 3 standard cmos features 21
- Allows you to set memory voltage 21
- Allows you to set the cpu north bridge vid voltage auto sets the cpu north bridge vid voltage as required the adjustable range is dependent on the cpu being installed default normal 21
- Allows you to set the cpu voltage auto sets the cpu voltage as required the adjustable range is dependent on the cpu being installed default normal 21
- Allows you to set the north bridge voltage 21
- Cpu nb vid control 21
- Cpu voltage control 21
- Date mm dd yy 21
- Ddr3 voltage 21
- Determines whether to manually set the system voltages auto lets the bios automatically set the system voltages as required manual allows all voltage control items below to be configurable default auto 21
- Displays the normal operating voltage of your cpu 21
- Displays the normal operating voltage of your cpu north bridge 21
- Normal cpu vcore 21
- Normal cpu vcore nb 21
- Normal supplies the memory voltage as required default 21
- Normal supplies the north bridge voltage as required default 21
- Northbridge volt control 21
- Note increasing cpu voltage may result in damage to your cpu or reduce the useful life of the cpu note increasing cpu voltage may result in damage to your cpu or reduce the useful life of the cpu 21
- Note increasing memory voltage may result in damage to the memory or reduce the useful life of the note increasing memory voltage may result in damage to the memory or reduce the useful life of the memory 21
- Sets the system date 21
- Sets the system time 21
- System voltage control 21
- System voltage optimized 21
- Time hh mm ss 21
- 4 advanced bios features 22
- Access mode sets the hard drive access mode options are auto default chs lba large 22
- Allows you to determine whether the system will stop for an error during the post options are all errors no errors all but keyboard default 22
- Amd c1e support 22
- Auto lets the bios automatically detect ide sata devices during the post default 22
- Capacity approximate capacity of the currently installed hard drive 22
- Disabled disables this function default 22
- Enabled if a cpu that supports hardware c1e is installed the bios will automatically enable the hardware c1e function if not the bios will enable the software c1e function 22
- Enables or disables load line control this item allows you to adjust vdroop at different levels enabling load line calibration may keep the cpu voltage more constant under light and heavy cpu load auto lets the bios automatically configure this setting default auto 22
- Enables or disables the c1e cpu power saving function in system halt state when enabled the power consumption will be reduced during system halt state 22
- Halt on 22
- Ide channel 0 1 2 3 master slave 22
- Ide channel 0 1 master slave extended ide drive options are 22
- Igxconfiguration 22
- Load line control 22
- Manual allows you to manually enter the specifications of the hard drive when the hard drive access mode is set to chs 22
- Memory 22
- None if no ide sata devices are used set this item to none so the system will skip the detection of the device during the post for faster system startup 22
- Note this item is present only when you install a cpu that supports this feature 22
- The settings in this submenu are synchronous to those under the same items on the mb intelligent tweaker m i t main menu 22
- These fields are read only and are determined by the bios post 22
- Amd apm master mode amd application power management 23
- Amd c6 support 23
- Amd k8 cool quiet control 23
- Cpu core 1 23
- Cpu core 3 4 23
- Cpu core control 23
- Efi cd dvd boot option 23
- First second third boot device 23
- Hard disk boot priority 23
- One core per compute unit 23
- Virtualization 23
- 5 integrated peripherals 24
- Ahci configures the sata controllers to ahci mode advanced host controller interface ahci is an interface specification that allows the storage driver to enable advanced serial ata features such as native command queuing and hot plug 24
- Away mode 24
- Configures the operating mode of the integrated sata controller 24
- Enables or disables away mode in windows xp media center operating system away mode allows the system to silently perform unattended tasks while in a low power mode that appears off default disabled 24
- Enables or disables the integrated sata controllers default enabled 24
- Enables or disables the s m a r t self monitoring and reporting technology capability of your hard drive this feature allows your system to report read write errors of the hard drive and to issue warnings when a third party hardware monitor utility is installed default disabled 24
- Hdd s m a r t capability 24
- Init display first 24
- Native ide allows the sata controllers to operate in native ide mode enable native ide mode if you wish to install operating systems that support native mode default 24
- Onchip sata controller 24
- Onchip sata type sata2 0 sata2 3 connectors 24
- Onchipvga sets the onboard graphics as the first display 24
- Password check 24
- Pci slot sets the pci graphics card as the first display default 24
- Peg sets the pci express graphics card on the pciex16 slot as the first display 24
- Raid enables raid for the sata controller 24
- Setup a password is only required for entering the bios setup program default 24
- Specifies the first initiation of the monitor display from the installed pci graphics card pci express graphics card or the onboard graphics 24
- Specifies whether a password is required every time the system boots or only when you enter bios setup after configuring this item set the password s under the set supervisor user password item in the bios main menu 24
- System a password is required for booting the system and for entering the bios setup program 24
- Onboard audio function 25
- Onboard lan boot rom 25
- Onboard lan function 25
- Onboard parallel port 25
- Onboard serial port 25
- Onboard usb 3 controller vi 25
- Onchip sata port as esp 25
- Onchip sata port4 5 type sata2 4 sata2 5 connectors 25
- Parallel port mode 25
- Port0 as esp port1 as esp port2 as esp port3 as esp 25
- Port4 as esp port5 as esp 25
- Smart lan lan cable diagnostic function 25
- Usb controllers 25
- Usb legacy function 25
- Usb storage function 25
- Vl805 usb 3 gen 1 controller 25
- 6 power management setup 26
- Acpi suspend type 26
- Allows the system to be awakened from acpi s3 sleep state by a wake up signal from the installed usb device default enabled 26
- Allows the system to be awakened from an acpi sleep state by a wake up signal from a modem that supports wake up function default disabled 26
- Allows the system to be awakened from an acpi sleep state by a wake up signal from a pci or pcie device note to use this function you need an atx power supply providing at least 1a on the 5vsb lead default enabled 26
- Configures the way to turn off the computer in ms dos mode using the power button 26
- Delay 4 sec press and hold the power button for 4 seconds to turn off the system if the power button is pressed for less than 4 seconds the system will enter suspend mode 26
- Ecp mode use dma 26
- Enables or disables high precision event timer hpet for windows 7 operating system default enabled 26
- Hpet support 26
- Instant off press the power button and then the system will be turned off instantly default 26
- Modem ring resume 26
- Pme event wake up 26
- S1 pos enables the system to enter the acpi s1 power on suspend sleep state in s1 sleep state the system appears suspended and stays in a low power mode the system can be resumed at any time 26
- S3 str enables the system to enter the acpi s3 suspend to ram sleep state default in s3 sleep state the system appears to be off and consumes less power than in the s1 state when signaled by a wake up device or event the system resumes to its working state exactly where it was left off 26
- Selects dma channel for the lpt port in ecp mode this item is configurable only if parallel port mode is set to ecp or ecp epp options are 3 default 1 26
- Soft off by power button 26
- Specifies the acpi sleep state when the system enters suspend 26
- Usb wake up from s3 26
- 7 pnp pci configurations 27
- 7 pnp pciconfigurations 27
- Ac back function 27
- Erp support 27
- Kb power on password 27
- Pci1 irq assignment 27
- Power on by alarm 27
- Power on by keyboard 27
- Power on by mouse 27
- 8 pc health status 28
- Allows the system to emit warning sound if the fan is not connected or fails check the fan condition or fan connection when this occurs default disabled 28
- Case opened 28
- Cpu system fan fail warning 28
- Cpu system smart fan control 28
- Cpu warning temperature 28
- Current cpu system fan speed rpm 28
- Current system cpu temperature 28
- Disabled keeps or clears the record of previous chassis intrusion status default 28
- Displays current cpu system fan speed 28
- Displays current system cpu temperature 28
- Displays the current system voltages 28
- Displays the detection status of the chassis intrusion detection device attached to the motherboard ci header if the system chassis cover is removed this field will show yes otherwise it will show no to clear the chassis intrusion status record set reset case open status to enabled save the settings to the cmos and then restart your system 28
- Enabled clears the record of previous chassis intrusion status and the case open field will show no at next boot 28
- Enables or disables the cpu overheating protection function when enabled the cpu core voltage and ratio will be reduced when the cpu is overheated default enabled 28
- Enables or disables the fan speed control function enabled allows the fan to run at different speed according to the temperature you can adjust the fan speed with easytune based on system requirements if disabled fan runs at full speed default 28
- Hardware thermal control 28
- Reset case open status 28
- Sets the warning threshold for cpu temperature when temperature exceeds the threshold bios will emit warning sound options are disabled default 6 28
- Vcore ddr3 1 v 12v 3 v 28
- 10 load optimized defaults 29
- 11 set supervisor user password 29
- 12 save exit setup 29
- 13 exit without saving 29
- 9 load fail safe defaults 29
- 1 configuring a raid set 30
- 1 configuringaraidset 30
- A installing sata hard drive s in your computer 30
- B configuringsatacontrollermodeinbiossetup 30
- Before you begin please prepare the following items 30
- C configuringaraidarrayinraidbios 30
- Chapter 3 appendix 30
- Configuringtheonboardsatacontroller 30
- Raid levels 30
- A installing windows xp 31
- B installing windows 7 31
- Installing the sata raid ahci driver and operating system 31
- Making a sata raid ahci driver diskette 31
- 2 drivers installation 32
- Our commitment to preserving the environment 33
- Regulatory notices 33
- Regulatory statements 33
- Restriction of hazardous substances rohs directive statement 33
- Waste electrical electronic equipment weee directive statement 33
- Weee symbol statement 33
- Canada industry canada ic notices canada avis d industry canada ic 34
- Fcc notice u s a only 34
- Contact us 35
- Gigabyte esupport 35
- To submit a technical or non technical sales marketing question please link to http esupport gigabyte com 35
Похожие устройства
- AEG L98699FL2 Руководство пользователя
- Gigabyte GA-78LMT-S2 R2 (rev. 1.0) Инструкция
- Gigabyte GA-970-Gaming SLI (rev. 1.0) Инструкция
- AEG LAVAMAT 1070 EL Руководство пользователя
- AEG LAVAMAT 1271 EL Руководство пользователя
- AEG LAVAMAT 14950 A Руководство пользователя
- AEG LAVAMAT 16850 Руководство пользователя
- AEG LAVAMAT 16950A3 Руководство пользователя
- AEG LAVAMAT 41070 Руководство пользователя
- Gigabyte GA-970-Gaming (rev. 1.1) Инструкция
- AEG LAVAMAT 41280 Руководство пользователя
- AEG LAVAMAT 41380 Руководство пользователя
- Gigabyte GA-970-Gaming (rev. 1.0) Инструкция
- AEG LAVAMAT 44810 Руководство пользователя
- AEG LAVAMAT 44820 Руководство пользователя
- AEG LAVAMAT 44850 Руководство пользователя
- AEG LAVAMAT 45050 Руководство пользователя
- AEG LAVAMAT 45100 Руководство пользователя
- AEG LAVAMAT 45110 Руководство пользователя
- AEG LAVAMAT 45120 Руководство пользователя
Скачать
Случайные обсуждения