Gigabyte MD71-HB1 (rev. 1.x) [94/134] Video remote storage

Gigabyte Server Management Console - 94 -

Video Remote Storage

To Video Remote Storage capture host video before critical event like crash or reset occurs, click

Video Recording > Auto Video Settings > Video Remote Storage.

A Sample screenshot of Video Remote Storage is as shown below.

1. Check Record Video to Remote Server to enable the Remote Video Support.

Note: Bydefault,videoleswillbestoredinlocalpathofBMC.Ifremotevideosupport

  isenabled,thenthevideoleswillbestoredonlyinremotepath,notwithinBMC.

2. Enter Maximum Duration (Sec) of the video.

3. Enter Maximum Size (MB) of the video.

4. Enter Maximum Dumps of the video.

Note: The Maximum Duration of the video should be in the range from 1 to 3600

seconds. The Maximum Size of the video should be in the range from 1 to 500 mb.

  TheMaximumDumpsshouldbeintherangefrom1to100.Therecordedvideole

  shouldmeeteitherthesizeconstraintordurationconstraint,accordingtothecongured

  settings,dependingonwhichconstraintismetrst.

5. Enter the Server Address.

Note: Server address will support the following:

IP Address (Both IPv4 and IPv6 format).

  FQDN(Fullyqualieddomainname)format.

6. Enter the source path in Path in Server eld

7. Select the Share Type (NFS/CIFS). If the selected share type is (CIFS), enter the User

Name, Password and Domain Nameintherespectiveelds.

8. Click Save to save the settings.