Home
Главная
Zelmer
Утюг
28Z030
Инструкция по эксплуатации Страница: 52

Zelmer 28Z030 [52/56] Dry ironin

52 GW28-025_v01

Preparation for operation – rst ironing

Remove any protective lms or sticker from the – soleplate (1) and the

cabinet, if any.

Unwind and straighten the – power cord (12).

Fill the iron as described in “How to ll water”. –

Connect the iron to a suitable mains supply outlet. –

Turn the – Temperature Dial (2) in clockwise direction to ●●● position

– control light (10) glows.

Control light goes off when the required temperature is reached. –

Move the – Steam Control Knob (6) to position.

Steam starts coming out from the holes in the sole plate after putting –

the iron in horizontal position and after Burst of steam knob (9).

Begin rst time ironing with an old towel. –

The steam is not generated after the water tank is emptied. –

The preparation work is completed. The iron is now ready for proper –

use.

After operation

Move the – Temperature Dial (2) in anti-clockwise direction to „MIN”;

the iron is switched off.

Move the – Steam Control Knob (6) to position.

Disconnect the iron from mains supply outlet. –

When the iron gets cool completely, store it vertically in a safe place. –

Spraying

This function can be used any time –

and is not affect any setting.

Fill the water tank as described in –

How to Fill Water.

Aim the – nozzle (5) to the garment.

Press the – Spray Button (8).

It may be necessary to press the –

spray button a few times to start this function.

Dry ironing – Always follow the garment manufacturer’s ironing

instructions mentioned at the garment label.

Unwind and straighten the – power cord (12).

Move the – Steam Control Knob (6) to position.

Connect the iron to a suitable mains supply outlet. –

Turn the – Temperature Dial (2) in clockwise direction to; set ●, ●● or

●●● position.

Control light (10) – glows, indicating that the iron is on.

Control light goes off when the required temperature is reached. The –

iron is now ready for use.

Move the – Temperature Dial (2) in anti-clockwise direction to „MIN”;

the iron is switched off.

Disconnect the iron from mains supply outlet. –

When the iron gets cool completely, store it vertically in a safe place. –

Steam ironing – Always follow the garment manufacturer’s

ironing instructions mentioned at the garment label.

Unwind and straighten the – power cord (12).

Fill the iron as described in “How to ll water”. –

Connect the iron to a suitable mains supply –

outlet.

Turn the – Temperature Dial (2) in clockwise

direction to ●●● position. (For optimum steam

quality, do not use ● or ●● setting for steam

ironing).

Control light (10) – glows, indicating that the iron is on.

Control light goes off when the required temperature is reached. The –

iron is now ready for use.

Move the – Steam Control Knob (6) to selected position, in order to set

the amount of steam.

After nishing move the – Temperature Dial (2) in anti-clockwise direc-

tion to „MIN”; the iron is switched off.

Move the – Steam Control Knob (6) to position.

Disconnect the iron from mains supply outlet. –

When the iron gets cool completely, store it vertically in a safe place. –

Zelmer 28Z030 [52/56] Dry ironin

Содержание

Похожие устройства