Zelmer 28Z030 [54/56] Anti drip system

Zelmer 28Z030 [54/56] Anti drip system
54 GW28-025_v01
Self-cleaning
This function removes the scales and minerals built up in the Steam
Chamber.
The iron will remain in the best condition if this function is performed at
least once a month or more regularly depending on the hardness of the
water used.
Fill the iron as described in “How to ll water”.
Connect the iron to a suitable mains supply outlet. See „Preparation
for operation”.
Turn the Temperature Dial (2) in clockwise direction to „MAX“ position.
Control light (10) glows, indicating that the iron is on.
Control light goes off when the required temperature is reached. The
iron is now ready for use.
Wait for one more cycle; pilot light glows and goes off.
After nishing move the Temperature Dial (2) in anti-clockwise direc-
tion to „MIN”; the iron is switched off.
Disconnect the iron from mains supply outlet.
Hold the iron horizontally over a sink.
Press and hold the Self-Cleaning Knob (7).
Steam and boiling hot water will drain from the holes on the soleplate
washing away the scales and minerals that have built up inside the
Steam Chamber.
Gently move the iron back and forth until the water tank is empty.
When Self-Cleaning is complete, release the Self-Cleaning Knob.
Rest your iron at the stand and allow to fully cool down.
Wipe the soleplate with a cold damp cloth.
Caution!
Keep skin/body away from the hot water.
Anti-Drip System
The system, which is designed to pre-
vent automatically water escaping from
the sole-plate when the iron is too cold.
During use, the anti-drip system may
emit a loud clicking sound, particularly
during heat-up or whilst cooling down.
This is per-fectly normal and indicates
that the system is functioning correctly.
Draining the water
Move the Steam Control Knob (6) to
position.
Disconnect the iron from mains supply out-
let.
Press the Burst of Steam Button (9), to re-
lease any trapped water when the soleplate
still hot.
Press the Spray Buttons (8), to release
any trapped water.
Turn the iron upside down and gently shake
it to remove the remaining water.
Before storage make sure that Steam Con-
trol Knob (6) is in position.
Cleaning and maintenance
Disconnect the iron from mains supply outlet.
The iron should get cool completely before cleaning.
Use a damp cloth and gentle washing liquid for cleaning.
Do not use aggressive detergents like cream, milk, paste etc. to clean
the casing. They can remove graphic symbols such as: scales, mark-
ing, caution signs, etc.
Never use sharp or rough objects to remove the deposits on the sole
plate.
Never use any abrasive, vinegar or descaling agents to clean the iron.

Содержание

Скачать