Planet WGS3-5220 [446/528] Ip vrrp interface config

User’s Manual of WGS3-2820/WGS3-5220

446

▫ Format ip vrrp

▫ Mode Global Config

12.5.1.1 no ip vrrp

Use this command in Global Config mode to disable the default administrative mode of VRRP on the router.

▫ Format no ip vrrp

Mode Global Config

12.5.2 ip vrrp (Interface Config)

Use this command in Interface Config mode to create a virtual router associated with the interface. The parameter <vrid>is the

virtual router ID, which has an integer value range from 1 to 255.

▫ Format ip vrrp <vrid>

▫ Mode Interface Config

12.5.2.1 no ip vrrp

Use this command in Interface Config mode to delete the virtual router associated with the interface. The virtual Router ID,

<vrid>, is an integer value that ranges from 1 to 255.

▫ Format no ip vrrp <vrid>

▫ Mode Interface Config

12.5.3 ip vrrp mode

This command enables the virtual router configured on the specified interface. Enabling the status field starts a virtual router.

The parameter <vrid> is the virtual router ID which has an integer value ranging from 1 to 255.

▫ Default disabled

▫ Format ip vrrp <vrid> mode

▫ Mode Interface Config

12.5.3.1 no ip vrrp mode

This command disables the virtual router configured on the specified interface. Disabling the status field stops a virtual router.

▫ Format no ip vrrp <vrid> mode

▫ Mode Interface Config

12.5.4 ip vrrp ip

This command sets the virtual router IP address value for an interface. The value for <ipaddr> is the IP address which is to be

configured on that interface for VRRP. The parameter <vrid> is the virtual router ID which has an integer value range from 1 to

255. You can use the optional [secondary] parameter to designate the IP address as a secondary IP address.

▫ Default none