Planet WGS3-5220 [465/528] 7 redistribute ospf

User’s Manual of WGS3-2820/WGS3-5220

465

12.7.37 redistribute (OSPF)

This command configures OSPF protocol to allow redistribution of routes from the specified source protocol/routers.

▫ Default metric—unspecified

type—2

tag—0

▫ Format redistribute {rip | bgp | static | connected} [metric <016777214>] [metric-type {1 | 2}] [tag

<0-4294967295>] [subnets]

▫ Mode Router OSPF Config

no redistribute

This command configures OSPF protocol to prohibit redistribution of routes from the specified source protocol/routers.

▫ Format no redistribute {rip | bgp | static | connected} [metric] [metric-type] [tag] [subnets]

▫ Mode Router OSPF Config

12.7.38 maximum-paths (OSPF)

This command sets the number of paths that OSPF can report for a given destination where maxpaths is platform dependent.

▫ Default 4

▫ Format maximum-paths <maxpaths>

▫ Mode Router OSPF Config

no maximum-paths

This command resets the number of paths that OSPF can report for a given destination back to its default value.

▫ Format no maximum-paths

▫ Mode Router OSPF Config

12.7.39 timers spf

Use this command to configure the SPF delay time and hold time. The valid range for both parameters is 0-65535 seconds.

▫ Default delay-time—5

hold-time—10

▫ Format timers spf <delay-time> <hold-time>

▫ Mode Router OSPF Config

12.7.40 trapflags (OSPF)

This command enables OSPF traps.

▫ Default enabled

▫ Format trapflags