Planet GSD-800S — user Manual for Network Access Control Configuration [62/87]
![Planet GSD-800S [62/87] Port access control](/views2/1070861/page62/bg3e.png)
User’s Manual of GSD-800S / GSD-802S / GSD-802PS
4.10.2 Port Access Control
This table is to configure the per port network access control setting. By drawing and select the menu bar to define the port
control type. The screen in Figure 4-44 and Figure 4-45 appears.
Figure 4-44 Per Port network access control configure table
Figure 4-45 802.1X Network access control mode selection
The Network Access Control port configuration table includes the following fields:
• Port
Selects the port to be configured. When the selection is changed, a screen
refresh will occur causing all fields to be updated for the newly selected port.
• Admin State
This selector lists the options for control mode. The control mode is only set if the
link status of the port is link up. The options are:
• Auto: The authenticator PAE sets the controlled port mode to reflect the
outcome of the authentication exchanges between the supplicant,
authenticator, and the authentication server.
• Force authorized: The authenticator PAE unconditionally sets the
controlled port to be authorized.
• Force unauthorized: The authenticator port access entity (PAE)
unconditionally sets the controlled port to unauthorized.
• Port State
This field indicates the configured control mode for the port.
• Re-authenticate
This button begins the re-authentication sequence on the selected port. This
button is only selectable if the control mode is 'auto'. If the button is not selectable,
it will be grayed out. Once this button is pressed, the action is immediate. It is not
Содержание
- Gsd 800s gsd 802s p.1
- User s manual p.1
- Port gigabit web smart ethernet switch p.1
- Gsd 802ps p.1
- Port gigabit web smart poe switch p.1
- Disclaimer p.2
- Ce mark warning p.2
- Weee warning p.2
- Trademarks p.2
- Revision p.2
- Fcc warning p.2
- Table of contents p.3
- Package contents p.5
- Introduction p.5
- How to use this manual p.5
- Product features p.6
- Product specification p.7
- Product overview p.9
- Product description p.9
- Installation p.9
- Switch front panel p.10
- Led indicators p.10
- Switch rear panel p.11
- Desktop installation p.12
- Install the switch p.12
- Rack mounting p.13
- Installing the sfp transceiver p.14
- Web management p.16
- Switch management p.16
- Overview p.16
- Management methods p.16
- Login the switch p.17
- Configuration p.18
- Main menu p.18
- System info p.20
- System p.20
- Misc configuration p.21
- Port configuration p.23
- Port mirroring p.25
- Vlan membership p.27
- Per port configuration p.30
- Vlan setting example p.32
- Rapid spanning tree p.40
- Rstp system configuration p.41
- Rstp port configuration p.42
- P port configuration p.42
- Rstp status p.43
- Port trunk p.46
- Link aggregation p.46
- Lacp status p.49
- Igmp snooping p.51
- Igmp snooping configuration p.51
- Igmp snooping status p.52
- Multicast group table p.54
- Quality of service p.55
- P qos mode p.56
- Dscp qos mode p.58
- X management p.59
- Radius server configuration p.60
- Port access control p.62
- Mac addresses p.64
- Dynamic address table p.64
- Static mac address p.65
- Reboot p.66
- Factory reset p.66
- Firmware upgrade p.67
- Configuration upload p.68
- Cable diagnostics p.71
- Ω differential impedance between the positive and negative cable terminals ieee std 802 allows for a termination of as large as 115ω or as small as 85ω if the termination falls out of this range it is reported as falls an anomalous termination p.72
- Web smart function p.73
- Port statistics p.77
- Status p.77
- Rstp status p.78
- Multicast group status p.78
- Logout p.78
- Lacp status p.78
- Igmp snooping status p.78
- Poe configuration gsd 802ps only p.80
- Learning p.82
- Switch operation p.82
- Store and forward p.82
- Forwarding filtering p.82
- Address table p.82
- Theory p.83
- Igmp versions 1 and 2 p.83
- Igmp snooping p.83
- Auto negotiation p.83
- Troubleshooting p.85
- The link led is not lit p.85
- Some stations cannot talk to other stations located on the other port p.85
- Performance is bad p.85
- Base tx port link led is lit but the traffic is irregular p.85
- Appendix a p.86
- A switch s rj 45 pin assignments p.86
- A 10 100mbps 10 100base tx p.86
- A rj 45 cable pin assignment p.87
Похожие устройства
-
Planet UMG-2000Инструкция по эксплуатации -
Planet ISW-801TИнструкция по эксплуатации -
Planet ISW-800Инструкция по эксплуатации -
Planet ISW-621S15Инструкция по эксплуатации -
Planet ISW-621Инструкция по эксплуатации -
Planet ISW-511S15Инструкция по эксплуатации -
Planet ISW-501TИнструкция по эксплуатации -
Planet ISW-500Инструкция по эксплуатации -
Planet IGS-801TИнструкция по эксплуатации -
Planet IGS-801Инструкция по эксплуатации -
Planet ISW-802MИнструкция по эксплуатации -
Planet ISW-800MИнструкция по эксплуатации
Explore the user manual for configuring network access control settings per port. Learn about control modes, port states, and re-authentication processes.