Planet WAP-4033 [18/37] Parameter description

Parameter Description

Mode Shows the current operation mode.

Band

2.4GHz (B): It allows to select the transmit rate up to 11Mbps.

2.4GHz (G): It allows to select the transmit rate up to 54Mbps.

2.4GHz (B+G): It allows selecting the 802.11b and 802.11g data rates.

Channel Number Select the appropriate channel from the list provided to correspond with your

network settings. Channels differ from country to country.

Channel 1-11 (North America)

Channel 1-14 (Japan)

Channel 1-13 (Europe)

AP MAC Address If you want to bridge multiple WAP-4033 in this mode, you have to enter the MAC

addresses of other WAP-4033 into the fields.

Set Security If you want to enable security to protect your wireless connection, please press “Set

Security” button and refer to section 3.2.8 “Security setting for bridge mode” to

configure the detail settings.

After configuration complete, please click “Apply” button to save the configuration. Then you will see

a screen to prompt you the settings are saved successfully. You may press “Continue” for configure

other settings or “Apply” to restart WAP-4033 with new configuration.

3.2.6 AP Bridge - WDS Mode

If you want WAP-4033 to bridge to other WAP-4033 and provide access for other wireless

clients at the same time, you have to set the WAP-4033 to “AP Bridge - WDS”. Simply speaking,

“AP Bridge - WDS” function is the combination of “AP mode” and “AP Bridge-Point to Multi-Point

mode”.