Biostar K8NHA Pro [45/60] Agp 2 speed

Write to Read Delay (tWTR)

T his bit spec if ies the write to read de lay. Samsung called th is Tcdlr ( last data in

to read command). It is measured from the rising edge following the last

non-masked data strobe to the rising edge of the next Read Command (Jedec

specs this as exactly one clock)

The Choices: 1 BUS CLOCKS (Default), 2 BUS CLOCKS

Read to Write Delay (tRWT)

T his bit specifies the Read to write delay. This is not a DRAM specified tim ing

parameter but must be considered due to routing latencies on the clock forwarded

bus. It is counted from first address bus slot, which was not associated with part

of the read burst.

The Choices: 4 BUS CLOCKS (Default), 1 BUS CLOCKS, 2 BUS CLOCKS, 3

BUS CLOCKS, 5 BUS CLOCKS, 6 BUS CLOCKS.

Refresh period (tREF)

This field specifies the number of clock cycles between refresh.

The Choices: 1x 2064 Cycles (Default).

CPU OverClock in MHz

T he Choices: 200 (default), 201, 202, 203, 204, 205, 206, 207.

AGP OverClock in MHz

T he Choices: 66 (default), 67, 68, 69, 70, 71, 72, 73.

AGP Aperture Size

Select the size of the Accelerated Graphics Port (AGP) aperture. The aperture is a

portion of the PCI memory address range dedicated for graphics memory address

space. Host cycles that hit the aperture range are forwarded to the AGP without

any translation.

T he Choices: 64M, 256M, 128M (Default), 32M, 16M, 8M, 4M.

AGP 3.0 Speed

By inserting AGP 2.0 card, Bios will automatically detect its default.

T he Choices: Auto (default)

AGP 2.0 Speed

By inserting AGP 2.0 card, Bios will automatically detect its default.

T he Choices: Auto (default), 1x, 1x2x, 1x2 x4x.

Note: When installing AGP 3.0 card, AGP 2.0 will automatically hide.

When installing AGP 2.0 card, AGP 3.0 will automatically hide.