Home
Главная
Ariston
Духовой Шкаф
STYLE 7OFH 1039 P IX
Инструкция по эксплуатации Страница: 12

Ariston STYLE 7OFH 1039 P IX [12/28] Automatic cleaning with the fast clean function

3. Secure the two frames

with the guide rails using

the holes provided on

the oven walls (

see

diagram

). The holes for

the left frame are

situated at the top, while

the holes for the right

frame are at the bottom.

4. Finally, fit the frames on the spacers A.

! Do not place the sliding racks in position 5.

Automatic cleaning with the FAST CLEAN

function

With the FAST CLEAN mode, the internal temperature

of the oven reaches 500°C. The pyrolytic cycle is

activated and burns away food and grime residues.

Dirt is literally incinerated.

Keep children away from the appliance during the

automatic cleaning cycle as surfaces may become

very hot. Particles may ignite inside the oven due to

the spontaneous combustion process. There is no

cause for concern: this process is both normal and

hazard-free.

Before initiating the FAST CLEAN mode:

• Remove large or coarse food residues from inside of

the oven using a damp sponge. Do not use

detergents.

• Remove all accessories.

• Do not place tea towels or pot holders over the oven

handle.

! If the oven is too hot, the pyrolytic cycle may not

start. Wait for the oven to cool down.

! The programme may only be started once the oven

door has been closed.

To activate the Fast Clean mode, press the

button; the TIME display will show the default

duration of 1h30 (normal cycle) while the

TEMPERATURE display will indicate "nor"; pressing

the "+" button activates the intensive cycle "int",

which lasts 2h; the "-" button activates the economy

cycle "eco", lasting 1h.

Safety devices

• The door is locked automatically as soon as the

temperature exceeds a certain value.

• Should a malfunction occur, the heating elements

will switch off.

• Once the oven door has been locked, you cannot

change the duration and end time settings.

! Programming is possible only after selecting the

FAST CLEAN mode.

Programming delayed automatic cleaning

1. Press the

button; the button and the

numbers on the TIME display will flash.

2. To set the duration, press buttons "+" and "-";

press and hold to scroll the numbers quicker and

make setting easier.

3. Once the desired end of cooking time is reached,

wait 10 seconds for the selection to be memorized,

or press button

again to fix the setting.

4. When the selected time has elapsed, END appears

on the TEMPERATURE display and a buzzer sounds.

• For example: it is 9:00 a.m. and the Economy (ECO)

FAST CLEAN mode level has been selected: default

set time 1 hour. 12:30 is selected as the end time.

The programme will start automatically at 11:30 a.m.

Programming has been set when the

and buttons

flash. After programming, in the time before the Fast

Clean mode starts, the TIME display indicates the

duration and end of the Fast Clean mode alternately.

To cancel a programming procedure press the “STOP”

button.

Once the automatic cleaning cycle is over

You will have to wait until the temperature inside the

oven has cooled down sufficiently before you can open

the oven door. You will notice some white dust

deposits on the bottom and the sides of your oven;

remove these deposits with a damp sponge once the

oven has cooled down completely. Alternatively, you

can make use of the already heated oven, in which

case it is not necessary to remove the deposits, they

are completely harmless and will not affect your food in

any way.

Содержание

Похожие устройства

3 Secure the two frames with the guide rails using the holes provided on the oven walls see diagram The holes for the left frame are situated at the top while the holes for the right frame are at the bottom GB Safety devices The door is locked automatically as soon as the temperature exceeds a certain value Should a malfunction occur the heating elements will switch off Once the oven door has been locked you cannot change the duration and end time settings 4 Finally fit the frames on the spacers A Do not place the sliding racks in position 5 Automatic cleaning with the FAST CLEAN function With the FAST CLEAN mode the internal temperature of the oven reaches 500 C The pyrolytic cycle is activated and burns away food and grime residues Dirt is literally incinerated Keep children away from the appliance during the automatic cleaning cycle as surfaces may become very hot Particles may ignite inside the oven due to the spontaneous combustion process There is no cause for concern this process is both normal and hazard free Before initiating the FAST CLEAN mode Remove large or coarse food residues from inside of the oven using a damp sponge Do not use detergents Remove all accessories Do not place tea towels or pot holders over the oven handle If the oven is too hot the pyrolytic cycle may not start Wait for the oven to cool down The programme may only be started once the oven door has been closed To activate the Fast Clean mode press the button the TIME display will show the default duration of 1h30 normal cycle while the TEMPERATURE display will indicate nor pressing the button activates the intensive cycle nt which lasts 2h the button activates the economy cycle eco lasting 1h 12 Programming is possible only after selecting the FAST CLEAN mode Programming delayed automatic cleaning 1 Press the i button the button and the numbers on the TIME display will flash 2 To set the duration press buttons and press and hold to scroll the numbers quicker and make setting easier 3 Once the desired end of cooking time is reached wait 10 seconds for the selection to be memorized or press button again to fix the setting 4 When the selected time has elapsed END appears on the TEMPERATURE display and a buzzer sounds For example it is 9 00 a m and the Economy ECO FAST CLEAN mode level has been selected default set time 1 hour 12 30 is selected as the end time The programme will start automatically at 11 30 a m Programming has been set when the and 1 0 buttons flash After programming in the time before the Fast Clean mode starts the TIME display indicates the duration and end of the Fast Clean mode alternately To cancel a programming procedure press the STOP button Once the automatic cleaning cycle is over You will have to wait until the temperature inside the oven has cooled down sufficiently before you can open the oven door You will notice some white dust deposits on the bottom and the sides of your oven remove these deposits with a damp sponge once the oven has cooled down completely Alternatively you can make use of the already heated oven in which case it is not necessary to remove the deposits they are completely harmless and will not affect your food in any way

Скачать