Candy GO 108DF/L1-S [40/41] Chapter 13
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Candy GO 108DF/L1-S [40/41] Chapter 13

Candy GO 108DF/L1-S [40/41] Chapter 13
78
79
NOTE:
THE MACHINE IS FITTED WITH A SPECIAL ELECTRONIC DEVICE, WHICH PREVENTS THE SPIN CYCLE
SHOULD THE LOAD BE UNBALANCED.
THIS REDUCES THE NOISE AND VIBRATION IN THE MACHINE AND SO PROLONGS THE LIFE OF YOUR
MACHINE.
CHAPTER 13
EN
FAULT
If the fault should persist, contact a Candy Technical Assistance Centre.For prompt
servicing, give the model of the washing machine, to be found on the label placed on
the cabinet inside of the porthole or on the guarantee certificate.
Important
1The use of environment friendly detersives without phosphates may produce the
following effects:
- The discharge rinse water may result cloudier due to the presence of zeolites in
suspension. This does not compromise the efficiency of the rinses.
- The presence of white powder (zeolites) on the washing at the end of the washing
cycle. This does not remain incorporated in the fabric and does not alter the colour.
- The presence of foam in the last rinse water which is not necessarily a sign of
inadequate rinsing.
- The non-ionic surface-active agents present in the composition of washing
machine detersives are often difficult to remove from the washing itself and, even in
small quantities, may produce visible signs of the formation of foam.
- Carrying out further rinses, in cases such as this, is not useful.
2If your washing machine fails to function, carry out the above-mentioned checks
before calling the Candy Technical Assistance Service.
1. Does not function
on any
programme
2. Does not load
water
3. Does not
discharge water
4. Water on floor
around washing
machine
5. Does not spin
6. Strong vibrations
during spin
7. Display reads error
0, 1, 5, 7, 8, 9
8. Display reads
error 2
9. Display reads
error 3
10.Display reads
error 4
Mains plug not plugged in
Mains switch not on
No power
Electric circuit fuses failure
Load door open
See cause 1
Inlet tap turned off
Timer not set correctly
Discharge tube bent
Odd material blocking filter
Leak from the washer between the tap
and inlet tube
The washing machine has not
discharged water
“No spin” setting (some models only)
Washing machine not perfectly level
Transport bracket not removed
Washing load not evenly distributed
–
No water fill.
No pump out.
Machine overfilled with water.
Insert plug
Turn on mains switch
Check
Check
Close load door
Check
Turn on water inlet tap
Set timer on correct position
Straighten discharge tube
Check filter
Replace washer and tighten the tube
on the tap
Wait a few minutes until the machine
discharges water
Turn the programme dial onto spin
setting
Adjust special feet
Remove transport bracket
Distribute the washing evenly
Call service.
Check water supplies are on.
Check drain is clear.
Check drain hose is not kinked.
Turn off water supply to machine.
Call service.
CAUSE
REMEDY
Z zastrzezeniem prawa do modyfikacji technicznych i ewentualnych bäëdów
drukarskich.
A gyártó minden felelosséget elhárít az ebben a füzetben esetleg eloforduló
nyomdahibákkal kapcsolatban. A gyártó – a lényeges jellemzok megváltoztatása
nélkül – fenntartja a termékek szükség szerinti módosításának jogát.
V˘robce se omlouvá za pfiípadné tiskové chyby v tomto návodû k pouÏití.
Dále si v˘robce vyhrazuje právo provést potfiebné zmûny na sv˘ch v˘robcích,
které nemají vliv na jejich základní charakteristiku.
Ôèpìa-èçãoòoâèòeëü íe íeceò íèêaêoé oòâeòcòâeííocòè ça oøèáêè ïe÷aòè,,
coäepæaùèecÿ â äaííûx èícòpyêöèÿx, è ocòaâëÿeò ça coáoé ïpaâo
yëy÷øeíèÿ êa÷ecòâa coácòâeííûx èçäeëèé, ocòaâëÿÿ íeèçìeííûìè ocíoâíûe
òexíè÷ecêèe xapaêòepècòèêè.
The manufacturer declines all responsibility in the event of any printing mistakes in
this booklet. The manufacturer also reserves the right to make appropriate
modifications to its products without changing the essential characteristics.

Содержание

Похожие устройства

CHAPTER 13 FAULT 1 Does not function on any programme 2 Does not load water 3 Doesnot discharge water REMEDY CAUSE Mains plug not plugged in Insert plug Mains switch not on Turn on mains switch No power Check Electric circuit fuses failure Check Load door open Close load door See cause 1 Check Inlet tap turned off Turn on water inlet tap Timer not set correctly Set timer on correct position Discharge tube bent Straighten discharge tube Odd material blocking filter Check filter 4 Water on floor around washing machine Leak from the washer between the tap and inlet tube Replace washer and tighten the tube on the tap 5 Does not spin The washing machine has not discharged water Wait a few minutes until the machine discharges water No spin setting some models only Turn the programme dial onto spin setting Washing machine not perfectly level Adjust special feet Transport bracket not removed Remove transport bracket Washing load not evenly distributed Distribute the washing evenly 6 Strong vibrations during spin 7 Display reads error 0 1 5 7 8 9 If the fault should persist contact a Candy Technical Assistance Centre For prompt servicing give the model of the washing machine to be found on the label placed on the cabinet inside of the porthole or on the guarantee certificate Important 1 The use of environment friendly detersives without phosphates may produce the following effects The discharge rinse water may result cloudier due to the presence of zeolites in suspension This does not compromise the efficiency of the rinses The presence of white powder zeolites on the washing at the end of the washing cycle This does not remain incorporated in the fabric and does not alter the colour The presence of foam in the last rinse water which is not necessarily a sign of inadequate rinsing The non ionic surface active agents present in the composition of washing machine detersives are often difficult to remove from the washing itself and even in small quantities may produce visible signs of the formation of foam Carrying out further rinses in cases such as this is not useful 2lf your washing machine fails to function carry out the above mentioned checks before calling the Candy Technical Assistance Service Call service 8 Display reads error 2 No water fill Check water supplies are on 9 Display reads error 3 No pump out Check drain is clear Check drain hose is not kinked 10 Display reads error 4 Machine overfilled with water Turn off water supply to machine Call service NOTE THE MACHINE IS FITTED WITH A SPECIAL ELECTRONIC DEVICE WHICH PREVENTS THE SPIN CYCLE SHOULD THE LOAD BE UNBALANCED THIS REDUCES THE NOISE AND VIBRATION IN THE MACHINE AND SO PROLONGS THE LIFE OF YOUR MACHINE Z zastrzezeniem prawa do modyfikacji technicznych i ewentualnych biedów drukarskich A gyàrtó minden felelosséget elharit az ebben a fûzetben esetleg elolorduló nyomdahibàkkal kapcsolatban A gyàrtó a lényeges jellemzok megvàltoztatàsa nélkûl fenntartja a termékek szûkség szerinti módositàsànak jogàt Vyrobce se omlouvd za pfipadné tiskové chyby v tomto nâvodè к pouziti Dale si vyrobce vyhrazuje pravo provést potfebné zmèny na svych vyrobcich které nemaji vliv na jejich zdkladni charakteristiku Фирма изготовитель не несет никакой ответственности за ошибки печати содержащиеся в данных инструкциях и оставляет за собой право улучшения качества собственных изделий оставляя неизменными основные технические характеристики The manufacturer declines all responsibility in the event of any printing mistakes in this booklet The manufacturer also reserves the right to make appropriate modifications to its products without changing the essential characteristics 78 79

Скачать