Lelit PL041TEM [7/24] English

Pagina 7

English

27. Fit the pod filter (18) into the filter holder (8) that has been warmed up by leaving it attached to the brewing

group as described in point 7.

28. Open the single packed pod and pay attention not to damage the pod.

29. Place the pod in its filter (18).

30. Insert the filter holder (8) in the brewing group ring (5), turn it from left to right with force, then put the cup

Steam:

34. Check that the water tank (1) has been filled in with water by looking at the water level indicator (20).

35. Press the on/off switch (11): the indicator light of the switch (11) will come on. Do this operation only if the

machine is off. If it’s on pass to the following point.

36. Position the lever switch (13) on steam mode.

37. As soon as the light (14) goes on, the machine is ready for use.

38. Open the steam/hot water knob (4). First some water will flow out and then the steam.

39. Put the cup with the desired infusion under the steam tube (6) and turn the knob (4) completely.

40. When the drink has been suitably frothed, close the steam/hot water knob (4).

41. IMPORTANT: after you have frothed your milk, reopen the steam/hot water knob (4) and position the steam

42. Check that the water tank (1) has been filled in with water by looking at the water level indicator (20).

43. Press the on/off switch (11): the indicator light of the switch (11) will come on. Do this operation only if the

machine is off. If it’s on pass to the following point.

44. Position the lever switch (13) on hot water.

45. As soon as the PID’s display (21) shows the set temperature and the indicator light (14) remains on, the

machine is ready for use.

46. Open the steam/hot water knob (4) and lift the pump switch (22).

47. Hot water will flow out from the steam arm (6) immediately.

48. Once you have got the desired quantity of water, repress the switch (22) and close the steam/water knob (4).

49. After obtaining hot water from the arm (6), make sure that there is still water in the tank (1).

order to set the desired temperature, starting from a min. of 80C° up to a max. of 130C°.

- after 3 sec. from pressing the last button, the inserted temperature is memorized and the display shows the

set temperature.

NB: if the temperature is set too high, once a coffee request is made, the display starts to flash.

USEFUL TIPS:

- The single cup filter (9), the two cup filter (10) and the pod filter (18) do not need to be washed after each

use but please check that the holes are not blocked.

- For best results, we suggest warming the cups up on the cup warmer (2) which works only when the machine

is on.

- It is recommended to clean, after each use, the steam arm (6) and the strainer holder (8) carefully.

- For cleaning it is recommended the use of a wet damp cloth.

- Do not leave the machine outdoor. And do not immerse the machine in water.

- The machine can be used only by adults and must be kept away from children.

- Do not wash strainer and strainer holder in dishwasher