Lelit PL041TEM [8/24] English

Pagina 8

English

TECNICAL DATA:

Voltage: 230 V – 50 Hz

Power: 1050 W

Heating time: ca. 3 min.

TROUBLESHOOTING:

We thank you for buying one of our products, projected and assembled in accordance with the most up-to date

technological innovations.

Following carefully the simple operations described in this manual, which respect all essential safety regulations, you

will get the best performances and will appreciate the remarkable reliability of this product in the years to come.

Please find below the description of the most frequent problems and of their solution:

PROBLEM CAUSE SOLUTION

4. The filter holder has not be tightened

under the brewing group ring

1. Use a different coffee blend

4. Tighten better the filter holder

The coffee is too cold

1. The machine had not reached the

proper temperature

2. Filter-holder has not been preheated

3. Cups have not been preheated

4. Thermostat malfunction.

“Making an Espresso Coffee”

2. Filter-holder must be heated together with

the water – see section “Starting the Machine”

3. Properly heat the cups on the cup-warmer

(2)

Coffee comes out

between the coffee group

and the filter-holder

1. Filter-holder not properly inserted

2. Too much coffee in the filter

3. Edge of the filter-holder not clean

4. The douche seal is worn or damaged

1. Insert the filter-holder correctly

2. Put less coffee in the filter

3. Clean the edge of the filter-holder and the

brewing group seal

4. Contact the nearest SERVICE CENTER

Coffee comes out in drops

2. Too much coffee in the filter

2. Put less coffee in the filter

1. The water tube hole may be

3. The steam nozzle has been

improperly positioned

3. Reposition the steam nozzle

No coffee produced during

the coffee cycle; the

manometer indicates 0

bar pressure

1. Lack of water in the tank

2. Steam switch on

1. Fill the tank

2. Turn off the steam switch

2. Too much coffee in the filter

3. Coffee too firmly pressed

4. The brewing group douche is dirty

2. Put less coffee in the filter

3. Press the coffee more gently

4. Contact the nearest SERVICE CENTER

The machine does not

work and the ON light

does not come on

1. No electricity

2. The power cable is not properly

plugged in

3. The power cable is damaged

does not go off within 10

minutes

2. Heating element malfunction

2. Contact the nearest SERVICE CENTER

The inserted data and pictures can be subject to changes without previous notice for the improvement of the machine’s

performances.