Candy CFDN 180 EU/1 [26/107] Function settings

Candy CFDN 180 EU/1 [26/107] Function settings
26
Leveling the Fridge
If the Freezer is not level, the door and magnetic
seal alignment will be affected and may cause
you Freezer to work incorrectly. Once the
Freezer is placed in its final location, adjust the
leveling feet at the front by turning them.
Cleaning before use
Wipe the inside of the Fridge with a weak
solution of bicarbonate of soda. Then rinse with
warm water using a damp sponge or cloth.
Wash the baskets and shelves in warm soapy
water and dry completely before replacing in
the Fridge. The external parts of the Fridge can
be cleaned with wax polish. See page 9 for more
details on cleaning.
Before plugging in YOU MUST
Check that you have a socket which is
compatible with the plug supplied with the
Freezer. If not see the section called ELECTRICAL
INFORMATION .
Before switching on!
DO NOT SWITCH ON UNTIL FOUR HOURS AFTER
MOVING THE FREEZER.
The coolant fluid needs time to settle. If the
appliance is switched off at any time, wait 30
minutes before switching back on to allow the
coolant fluid to settle.
Before filling your Fridge
Before storing foods in your Fridge, turn the
Fridge on and wait for 24 hours, to make sure it
is working properly and to allow the Fridge to
fail to the correct temperature.
START
Display panel is located at the door of the cold
storage room, interface display as follows:
FUNCTION SETTINGS
Power up
The first connection of the refrigerator power
supply, display the full light display 2 seconds
after the resumption of normal display, the
refrigerator by the smart run by default.
Note: The electric control refrigerator has the
function of self check function, and the
function can be ignored when the refrigerator
door is opened for the first time.
Display control
If the cold storage door closed, and no key
operation within 3 minutes, the display
automatically put out; display off, open the
refrigerator door or press any key, the display
light.
Eco
Press the "Function" key to "Eco" icon flashing,
press the "OK" key, enter the intelligent
function. At this point, a fridge, freezer default
setting of 5.0, -18.0.
In intelligent state, press the "Function" key to
"Eco" icon flashing, press "OK" to exit the
intelligent functions; In the condition of
intelligence, refrigerator in the process of quick-
frozen, exit the intelligent function.
Temperature control
1)Press the "Temp.Zone" key, cold storage,
frozen temperature zone icon will continuous
cycle flashing shows in the following order:"cold
storage temperature zone"→"frozen
temperature zone"→"refrigeration
temperature area".
(into the smart, quick-frozen function,
corresponding temperature regions cannot set
temperature)
2)Press the "Function" key, function selection
order according to the following cycle are:
" Hygien Tech " → "Fast - freezer" " Vacation
" → " Eco " → " Hygien Tech ".

Содержание

Скачать