Pekatherm F70 [23/50] Operating instructions

OPERaTING INSTRUCTIONS

1) Insert your feet inside the boot, unzipping the front part the product if necessary.

2) Close the zip and fasten the boot’s central tab, bringing it between your legs until the

magnet inside the tab connects to the rear part of the boot.

3) Plug the product into the mains socket, making sure your mains’ specications correspond

to those of the product stated on the label.

4) LED indicators will light up and a safety check will start. If everything is correct the control

unit is then automatically set at the level 0 which indicates that the product is switched off.

All LED indicators will go off.

5) Proceed to adjust the temperature among the four available settings by pushing the

button on the control unit. At this point the product is running normally. The LED

indicator corresponding to the temperature setting you have selected will remain lit.

After a few seconds you will be able to perceive warmth. Check that there are no

creases or folds.

6) To switch off the product proceed to push the button until all the LED indicators are off

(level 0). The heating element remains switched off in this position. To turn the product

on push the button. Remember to unplug the product from the mains if you do not use

it for a considerable period if time.

7) Unplug the product and let it cool down before storing.

ENGlISH