Daikin FWXM10AATV3 [13/20] Cleaning the outside

2.12

2.13

2.14

INSTALLATION

Electrical connections

Make electrical connections according to the requirements

set out in sections General Warnings and Foundamental

Safety Rules by reference to the patterns present in the

installation and accessories manuals.

Before doing any work, make sure the power is switched

off.

The unit must be connected to the mains through a

multipolar switch with minimum contact opening of at

least 3mm or with a dewice that allows the complete

disconnection from the device under the overvoltage

conditions category III.

Maintenance

Cleaning the outside

Routine maintenance is indispensable to keep the heat

pump convector in perfect working condition, safe and

reliable over the years. This can be done every six months

for some interventions and annually for others, by the

Technical Service Assistance, technically authorised and

prepared, using always original spare parts.

Before every cleaning and maintenance intervention,

disconnect the appliance from the mains by switching

off the master switch.

Wait until the parts have cooled down to avoid the risk

of burns.

Do not use abrasive sponges or abrasive or corrosive

detergents to avoid damaging the painted surfaces.

When necessary, clean the outer surfaces of the heat

pump convector with a soft damp cloth.