Home
Главная
Binatone
Утюг
SI-4024
Инструкция по эксплуатации Страница: 6

Binatone SI-4024 [6/38] Before use

BEFORE USE

! Remove all packaging from the appliance.

! Turn the steam control knob (9) into the «0»

position, and the temperature control knob

(10) – into the «Min» position.

! If you intend to iron with spray or steam,

push the cover (4) up and fill the tank (5)

with water through the opening (3). Use the

measuring jug (14) for convenience and ease.

Note: If your area has hard water, we recommend you use

filtered or bottled water.

Attention: Always disconnect the iron from the electricity

mains supply prior to filling the tank (5). Do not fill

the tank (5) with other liquids.

! Prior to first use iron a clean old piece of cotton cloth to make

sure the sole plate and the water tank are absolutely clean

(see subsection «Steam ironing» ).

Note: Light smoke may emit during the first use of the

appliance: it is a normal occurrence that will soon

disappear.

INSTRUCTIONS FOR USE

1. Place the iron into a vertical position.

2. Insert the power plug into the mains supply

outlet.

3. Turn the temperature control knob (10) to

set the temperature recommended by the

manufacturer of the textile article (usually

indicated on the article’s label).

Note: In case the manufacturer’s recommendations are

missing, select the temperature setting, which

corresponds to the type of the cloth to be ironed (see

section «Useful advice» ).

4. The temperature indicator (12) will light up to indicate that the

iron is being heated to the set temperature level. When the set

temperature level is reached, the indicator (12) will turn off.

Note: During operation of the appliance the light indicator

will light up and turn off periodically; this is normal

and not a malfunction.

Steam ironing

Dry ironing can be can be used at any temperature setting. To

do this the steam control knob (9) must be put into the «0» posi-

tion. If you intend to use the steam function, allow the iron to heat

to the required temperature level then put the control knob (9)

into the required position.

Содержание

Похожие устройства

BEFORE USE Remove all packaging from the appliance Turn the steam control knob 9 into the 0 position and the temperature control knob 10 into the Min position If you intend to iron with spray or steam push the cover 4 up and fill the tank 5 with water through the opening 3 Use the measuring jug 14 for convenience and ease Note If your areahas hard water we recommend you use filtered or bottled water Attention Always disconnect the iron from the electricity mains supply prior to filling the tank 5 Do not fill the tank 5 with other liquids Prior to first use iron a clean old piece of cotton cloth to make sure the sole plate and the water tank are absolutely clean see subsection Steam ironing Note Light smoke may emit during the first use of the appliance it is a normal occurrence that will soon disappear INSTRUCTIONS FOR USE Place the iron info a vertical position Insert the power plug info the mains supply outlet Turn the temperature control knob 10 to set the temperature recommended by the manufacturer of the textile article usually indicated on the article s label Note In case the manufacturer s recommendations are missing select the temperature setting which corresponds to the type of the cloth to be ironed see section Usefuladvice 4 The temperature indicator 12 will light up to indicate that the iron is being heated to the set temperature level When the set temperature level is reached the indicator 12 will turn off Note During operation of the appliance the light indicator will light up and turn off periodically this is normal arid not a malfunction Steam ironing Dry ironing can be can be used at any temperature setting To do this the steam control knob 9 must be put info the 0 posi tion If you intend to use the steam function allow the iron to heat to the required temperature level then put the control knob 9 into the required position

Скачать