Zebra EC30 EC300K-1SA2AA6 [118/127] Exit window

Zebra EC30 EC300K-1SA2AA6 [118/127] Exit window
Maintenance and Troubleshooting
118
Exit Window
Wipe the exit window periodically with a lens tissue or other material suitable for cleaning optical material such
as eyeglasses.
Troubleshooting
The following tables provides typical problems that might arise and the solution for correcting the problem.
Table 15 Troubleshooting the EC30
Problem Cause Solution
When pressing the
power button the
device does not turn
on.
Battery not charged. Charge or replace the battery in the device.
System crash. Perform a reset.
When pressing the
power button the
device does not turn
on but two LEDs
blink.
Battery charge is at a
level where data is
maintained but battery
should be re-charged.
Charge the battery in the device.
Battery did not
charge.
Battery failed. Contact system administrator.
Device removed from
cradle while battery was
charging.
Insert device in cradle. See Charging the Device on page
15.
Extreme battery
temperature.
Battery does not charge if ambient temperature is below
0°C (32°F) or above 40°C (104°F).
Cannot see
characters on
display.
Device not powered on. Press the Power button.
During data
communication with
a host computer, no
data transmitted, or
transmitted data was
incomplete.
Device disconnected
from host computer
during communication.
Reattach the communication cable and re-transmit.
Incorrect cable
configuration.
See the system administrator.
Communication
software was incorrectly
installed or configured.
Perform setup.
During data
communication over
Wi-Fi, no data
transmitted, or
transmitted data was
incomplete.
Wi-Fi radio is not on. Turn on the Wi-Fi radio.
You moved out of range
of an access point.
Move closer to an access point.

Содержание

Похожие устройства

Скачать