Home
Главная
Vitek
Кофемашина
VT-1510 SR
Инструкция по эксплуатации Страница: 8

Vitek VT-1510 SR [8/80] English

ENGLISH

Attention! Water is hot. Be careful.

Note:

- During water boiling the pump switches

on periodically, it is normal.

- To switch to the “ESPRESSO” mode from

the “CAPPUCCINO” mode or the “WATER

BOILING” mode, press the On/Off (14)

button once.

AUTO-OFF button

If you have not been using the coffee mak-

er for 1 hour, it will switch off automatical-

ly. You can switch on the coffee maker by

pressing the On/Off (14) button.

SCALE REMOVAL

When you see the flashing (25) indication

on the display (6) you should perform scale

removal in the heating element of the cof-

fee maker using citric acid. While scale

removal, make sure not to damage the

tabletop with acids, be especially careful

if the tabletop is made of marble or stone.

Put a tissue, a dry cloth under the coffee

maker or place the coffee maker in the cor-

responding tray.

Note: The appearance of the (25) indica-

tion on the display (6) depends on water

hardness in your region and is about:

- HI-high water hardness – 30 liters

- MI- medium water hardness - 45 liters

- LO- low water hardness - 60 liters

When you see the flashing (25) indication

on the display (6), perform scale removal.

• Unplug the coffee maker and wait until it

cools down completely.

• Turn the filter holder to the left and re-

move it.

• Use a corresponding cross screwdriver

to remove the mounting screw (a), by

turning it clockwise, and remove the filter

– strainer (b) (pic.9).

• When there is scale deposit on the filter

(b), put the filter in citric acid solution,

and then wash it.

• Prepare citric acid solution: 2 teaspoons

of citric acid and 1 liter of water and pour

this solution in the water tank (9). Set the

tank (9) on its place.

• Select a corresponding bowl with capac-

ity not less than 0,6 l and put it on the wa-

ter tray grid (2) (1). Place the bowl in a

way that the cappuccinator tube (12) is in

the bowl.

• Insert the plug into the socket and press

the On/Off (14) button to switch on the

coffee maker.

• Wait until the coffee maker warms up, the

(29) indication will disappear.

• Press the (17), (19) buttons simultane-

ously, the pump will switch on and water

supply will start, the scale removal (26)

indication will be lighting, the heating el-

ement will switch on as well and the (29)

indication will light up.

• To wash the cappuccinator tube (12) sup-

ply steam, by turning the steam supply

handle (10) anti clockwise until bumping

for 8-10 sec. Stop steam supply, by turn-

ing the steam supply handle (10) clock-

wise until bumping.

• When about 0,5 l of water passes, the

pump will switch off and the coffee mak-

er will switch to the standby mode.

• Detach installed container, at that sound

signal is heard, and symbol (23) starts

blinking on display (6), pour water out of

container and put it again on the grill (2)

of water tray (1). Install the container thus

the cappuccinator-pipe (12) is inside it.

• Detach and clean water reservoir (9), fill it

with water up to maximal mark and install

it to the former place.

• Pump is on, and cleaning mode is start-

ed. In order to clean cappuccinator-pipe

(12), open steam supply by turning team

supply handle (10) clockwise up to stop

for 2-3 seconds.

• After completion of cleaning mode, cof-

fee machine is switched off automati-

cally.

1510.indd 81510.indd 8 02.04.2008 15:43:5902.04.2008 15:43:59

Vitek VT-1510 SR [8/80] English

Содержание

Похожие устройства