Ariston CE6VM3 [15/68] H05rr f 4x4 cei unel 35363

Ariston CE6VM3 [15/68] H05rr f 4x4 cei unel 35363
GB
15
NL3L1L2
400V 3N~
H05RR-F 5x2.5 CEI-UNEL 35363
1
3
2
4
5
NL2L1
400V 2N~
H05RR-F 4x4 CEI-UNEL 35363
1
3
2
4
5
Secure the power supply cable by fastening the
cable clamp screw then put the cover back on.
Connecting the supply cable to the electricity
mains
Install a standardised plug corresponding to the
load indicated on the appliance data plate (see
Technical data table).
The appliance must be directly connected to the
mains using an omnipolar switch with a minimum
contact opening of 3 mm installed between the
appliance and the mains. The switch must be
suitable for the charge indicated and must comply
with current electrical regulations (the earthing wire
must not be interrupted by the switch). The supply
cable must be positioned so that it does not come
into contact with temperatures higher than 50°C at
any point.
Before connecting the appliance to the power
supply, make sure that:
The appliance is earthed and the plug is compliant
with the law.
The socket can withstand the maximum power of
the appliance, which is indicated by the data
plate.
The voltage is in the range between the values
indicated on the data plate.
The socket is compatible with the plug of the
appliance. If the socket is incompatible with the
plug, ask an authorised technician to replace it.
Do not use extension cords or multiple sockets.
Once the appliance has been installed, the power
supply cable and the electrical socket must be
easily accessible.
The cable must not be bent or compressed.
The cable must be checked regularly and replaced
by authorised technicians only.
The manufacturer declines any liability shou
ld
these safety measures not be observed.
TABLE OF CHARACTERISTICS
Oven dimensions
(HxWxD)
32x43.5x40 cm
Volume
56 l
Useful
measurements
relating to the oven
compartment
width 42 cm
depth 44 cm
height 8.5 cm
Voltage and
frequency
see data plate
Ceramic hob
Front Left
Back Left
Back Right
Front Right
Max. ceramic hob
consumption
1700 W
1200 W
2100 W
1200 W
6200 W
ENERGY LABEL
Directive 2002/40/EC on the
label of electric ovens.
Standard EN 50304
Natural convection energy
consumption
heating mode:
Traditional mode
Declared forced convection
energy consumption
heating mode:
Multilevel.
This appliance conforms to the
following European Economic
Community directives:
2006/95/EC dated 12/12/06
(Low Voltage) and subsequent
amendments - 2004/108/EC
dated 15/12/04
(Electromagnetic Compatibility)
and subsequent amendments -
93/68/EEC dated 22/07/93 and
subsequent amendments.
2002/96/EC
1275/2008 (Stand-by/Off mode)

Содержание

400V 2N H05RR F 4x4 CEI UNEL 35363 N L2 L1 Once the appliance has been installed the power GB supply cable and the electrical socket must be easily accessible The cable must not be bent or compressed The cable must be checked regularly and replaced by authorised technicians only The manufacturer declines any liability should 400V 3N H05RR F 5x2 5 CEI UNEL 35363 N L3 L2 L1 these safety measures not be observed TABLE OF CHARACTERISTICS Secure the power supply cable by fastening the cable clamp screw then put the cover back on Connecting the supply cable to the electricity mains Install a standardised plug corresponding to the load indicated on the appliance data plate see Technical data table The appliance must be directly connected to the mains using an omnipolar switch with a minimum contact opening of 3 mm installed between the appliance and the mains The switch must be suitable for the charge indicated and must comply Oven dimensions HxWxD 32x43 5x40 cm Volume 56 I Useful measurements relating to the oven compartment width 42 cm depth 44 cm height 8 5 cm Voltage and frequency see data plate Ceramic hob Front Left Back Left Back Right Front Right Max ceramic hob consumption 1700W 1200 W 2100 W 1200 W 6200 W with current electrical regulations the earthing wire Directive 2002 40 EC on the label of electric ovens Standard EN 50304 must not be interrupted by the switch The supply cable must be positioned so that it does not come into contact with temperatures higher than 50 C at any point ENERGY LABEL Before connecting the appliance to the power supply make sure that Declared forced convection energy consumption heating mode Multilevel 2 The appliance is earthed and the plug is compliant with the law The socket can withstand the maximum power of the appliance which is indicated by the data plate The voltage is in the range between the values indicated on the data plate The socket is compatible with the plug of the appliance If the socket is incompatible with the plug ask an authorised technician to replace it Do not use extension cords or multiple sockets Natural convection energy consumption heating mode I I Traditional mose J Ci This appliance conforms to the following European Economic Community directives 2006 95 EC dated 12 12 06 Low Voltage and subsequent amendments 2004 108 EC dated 15 12 04 Electromagnetic Compatibility and subsequent amendments 93 68 EEC dated 22 07 93 and subsequent amendments 2002 96 EC 1275 2008 Stand by Off mode 15