Vitek VT-1261 [6/32] English
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Vitek VT-1261 [6/32] English

Vitek VT-1261 [6/32] English
6
ENGLISH
• When the soleplate (13) reaches the set tem-
perature, the indicator (7) will go out, you can
start ironing.
• Turn the continuous steam supply knob (3) to
the position – steam supply is on, steam
will start going out from the soleplate (13)
openings.
• After you finish ironing, set the temperature
control knob (11) to the position «OFF», and
the continuous steam supply knob (3) to the
position – steam supply is off.
• Pull the power plug out of the mains socket
and let the iron cool down completely.
ATTENTION!
If the steam is not constantly supplied during
operation, check whether the temperature con-
trol knob (11) is set properly and there is water in
the water tank (10).
BURST OF STEAM
The burst of steam function is useful for ironing
folds and can only be used at high ironing tem-
peratures (when the temperature control knob
(11) is set to the position «•••», «МАХ»).
• When pressing the burst of steam button (4)
steam will go out of the iron soleplate more
intensively.
Note: - To avoid water leakage from steam
openings, press the burst of steam button (4)
with an interval no less than 4-5 sec.
VERTICAL STEAM
Vertical steam function can be used only at
high ironing temperatures (that is, when the
temperature control knob (11) is set to «•••»
or «MAX»).
Hold the iron vertically at the distance of
10-30 cm from the clothes and press the burst
of steam button (4) with 4–5 second intervals,
steam will be released from the soleplate (13)
intensively.
IMPORTANT INFORMATION: Vertical steaming
is not recommended for synthetic fabrics.
• To avoid fabric melting, do not touch it with
the iron soleplate while steaming.
• Never steam clothes on a person as tempera-
ture of the released steam is very high, use a
clothes hanger or a coat rack.
• After you finish ironing, switch the iron off, wait
until it cools down completely, then open the
water inlet lid (2), turn over the iron and pour
out the remaining water.
AUTOMATIC SWITCH OFF
This model has 2 automatic switch off modes.
1. If the iron remains still for 30 seconds in hori-
zontal position, the iron’s heating element will
be switched off.
2. If the iron remains still for 8 minutes in verti-
cal position, the iron’s heating element will
be switched off. The iron will be switched on
automatically once you resume ironing.
STEAM CHAMBER CLEANING
To prolong lifetime of the iron we recommend
cleaning the steam chamber regularly.
• Set the continuous steam supply knob (3) to
the position .
• Fill the water tank (10) up to the maximal mark
«MAX».
• Place the iron on its base (9).
• Insert the power plug into the mains socket.
• Set the control knob (11) to the maximum
soleplate temperature «MAX», the indicator
(7) will light up.
• When the soleplate (13) reaches the desired
temperature value, the indicator (7) will go
out, you can start cleaning.
• Switch the iron off setting the tempera-
ture control knob (11) to the «OFF» position
(SWITCHED OFF). Remove the power plug
from the mains socket.
• Place the iron horizontally above the sink, set
the continuous steam supply knob (3) to the
position «self clean» and hold it.
• Boiling water and steam with scale will be
released from the iron soleplate (13) open-
ings.
• Slightly sway the iron back and forth until all
the water leaves the water tank (10).
• Release the continuous steam supply knob
(3) and set it to the position .
• Place the iron on its base (9) and let it cool
down completely.
• When the iron soleplate (13) cools down com-
pletely, wipe it with a dry cloth.
• Before you take the iron away for storage,
make sure that there is no water in the water
tank (10) and that the iron soleplate (13) is
completely dry.
CLEANING AND CARE
• Before cleaning the iron, make sure that it
is unplugged and has cooled down com-
pletely.
IM VT-1261.indd 6 9/30/20 10:52 AM

Содержание

Похожие устройства

Скачать