Главная
Skipped breadcrumb items
BGD801Z без акк. и з.у
Инструкция по эксплуатации Страница: 6

Главная
Makita
BGD801Z без акк. и з.у
Инструкция по эксплуатации Страница: 6

Makita BGD801Z без акк. и з.у — правила безопасного использования и ухода за аккумуляторами [6/48]

Превью страниц Страница 6 / 48

Makita BGD801Z без акк. и з.у [6/48] Tips for maintaining maximum battery life

5. Do not short the battery cartridge:

(1) Do not touch the terminals with any

conductive material.

(2) Avoid storing battery cartridge in a

container with other metal objects such as

nails, coins, etc.

(3) Do not expose battery cartridge to water

or rain.

A battery short can cause a large current flow,

overheating, possible burns and even a

breakdown.

6. Do not store the tool and battery cartridge in

locations where the temperature may reach or

exceed 50 ﾟ C (122 ﾟ F).

7. Do not incinerate the battery cartridge even if

it is severely damaged or is completely worn

out. The battery cartridge can explode in a fire.

8. Be careful not to drop or strike battery.

9. Do not use a damaged battery.

SAVE THESE INSTRUCTIONS.

Tips for maintaining maximum battery life

1. Charge the battery cartridge before

completely discharged.

Always stop tool operation and charge the

battery cartridge when you notice less tool

power.

2. Never recharge a fully charged battery

cartridge.

Overcharging shortens the battery service life.

3. Charge the battery cartridge with room

temperature at 10 ﾟ C - 40 ﾟ C (50 ﾟ F - 104 ﾟ F).

Let a hot battery cartridge cool down before

charging it.

FUNCTIONAL DESCRIPTION

CAUTION:

• Always be sure that the tool is switched off and the

battery cartridge is removed before adjusting or

checking function on the tool.

Installing or removing battery cartridge

Fig.1

• Always switch off the tool before insertion or

removal of the battery cartridge.

• To remove the battery cartridge, withdraw it from

the tool while sliding the button on the front of the

cartridge.

• To insert the battery cartridge, align the tongue on

the battery cartridge with the groove in the housing

and slip it into place. Always insert it all the way

until it locks in place with a little click. If you can see

the red part on the upper side of the button, it is not

locked completely. Insert it fully until the red part

cannot be seen. If not, it may accidentally fall out of

the tool, causing injury to you or someone around

you.

• Do not use force when inserting the battery

cartridge. If the cartridge does not slide in easily, it

is not being inserted correctly.

Switch action

Fig.2

CAUTION:

• Before inserting the battery cartridge into the tool,

always check to see that the slide switch actuates

properly and returns to the "OFF" position when the

rear of the slide switch is depressed.

• Switch can be locked in "ON" position for ease of

operator comfort during extended use. Apply

caution when locking tool in "ON" position and

maintain firm grasp on tool.

To start the tool, slide the slide switch toward the "I (ON)"

position. For continuous operation, press the front of the

slide switch to lock it.

To stop the tool, press the rear of the slide switch, then

slide it toward the "O (OFF)" position.

Indication lamp with multi function

Fig.3

Indication lamps are located in two positions.

When the battery cartridge is inserted on the tool with the

slide switch positioned in the "O (OFF)" position, the

indication lamp flickers quickly for approximately one

second. If it does not flicker so, the battery cartridge or

indication lamp has broken.

− Overload protection

− When the tool is overloaded, the indication

lamp lights up. When the load on the tool is

reduced, the lamp goes out.

− If the tool continues to be overloaded and the

indication lamp continues to light up for

approximately two seconds, the tool stops.

This prevents the motor and its related parts

from being damaged.

− In this case, to start the tool again, move the

slide switch to the "O (OFF)" position once

and then to the "I (ON)" position.

− Battery cartridge replacing signal

− When the remaining battery capacity gets

small, the indicator lamp lights up during

operation earlier than enough capacity battery

use.

− Accidental re-start preventive function

− Even if the battery cartridge is inserted on the

tool with the slide switch in the "I (ON)"

position, the tool does not start. At this time,

the lamp flickers slowly and this shows that

the accidental re-start preventive function is at

work.

− To start the tool, first slide the slide switch

toward the "O (OFF)" position and then slide it

toward the "I (ON)" position.

Makita BGD801Z без акк. и з.у — правила безопасного использования и ухода за аккумуляторами [6/48]

Содержание

Похожие устройства