Sinbo SMX-2760 [11/52] Using your appliance

Sinbo SMX-2760 [11/52] Using your appliance
- 10 -
USING YOUR APPLIANCE
MEAT GRINDER
Assembling the meat grinder or making sausages or making kebbe attachment (See
figure B and figure E).
1. Take the body (Cutter housing 12) by the feed tube with the largest opening upwards.
2. Insert the worm shaft (17) in the cutter housing (12).
Fit the cutter blade (18) on the shaft with the cutting edges upwards.
3. Place the selected hole-plate over the blades ensuring that the two lugs fit in the two
cut-outs in the body.
4. Screw ring (20) the cap nut fully home on the body.
5. Check the assembly .the shaft should have no play nor be able to turn on itself.
6. Play the multifunction head in the horizontal position (a click should be heard ).
7. Offer up the assembled mincer attachment, titled towards you, to the outlet and engage
it fully. Return the feed tube to a vertical position by turning to the rear until it stops.
8. Place the removable tray on the feed tube.
CAUTION:
1. When you dissembled the body (Cutter housing 12), you must press the button (Release
button for Cutter housing, see the arrow of figure B).
2. Insert the pieces of meat in the feed tube piece by piece using the pusher, never push
the meat with the finger or any other utensil.
CLEANING
1. Unplug the appliance.
2. Never immerse the motor until in water or put it under running water wipe it with a
soft dry or slight damp cloth.
3. For easier cleaning, quickly rinse the accessories after use. Completely dismantle the
mixer attachment. Handle the blades with care, as some have sharp cutting edges.
4. Wash , rinse and wipe the accessories or the can be put in the dishwasher, except for
the metal components of the mincer attachment body Fine grinding disc(15),Medium
grinding disc(16),Worm shaft(17), Cutter blade (18),Coarse grinding disc (19) and Screw
ring(20).
5. The grinding disc and the blade must be kept lubricated. Wipe them over with cooking
oil after each use.
6. If your accessories are discoloured by food (carrots, oranges etc), rub them gently
with kitchen towel dipped in cooking oil and then clean in the usual way.
7. Blender assembly: pour hot water with a few drops of washing up liquid into the blender
jug. Close the cover. Fit it on the appliance and give a few pulses. Remove the blender,
rinse the jug under running water and leave it upside down to dry .for cleaning more
difficult residues, especially with thicker preparations. The blade nut assembly can be
detached from the bottom of the jug, to do this, place the empty blender upside down on
a flat surface, release the blade /nut assembly with a quarter turn and lift out the seal
with care.

Содержание

Скачать
Случайные обсуждения