ASRock B650 LiveMixer [52/61] English

Превью страниц Страница 52 / 61

English

ASRock BIOS Flashback feature allows you to update BIOS without powering on the system,

even without CPU.

To use the USB BIOS Flashback function, Please follow the steps below.

1. Download the latest BIOS le from ASRock's website : http://www.asrock.com.

2. Copy the BIOS le to your USB ash drive. Please make sure the le system of

your USB ash drive must be FAT32.

3. Extract BIOS le from the zip le.

4. Rename the le to “creative.rom” and save it to the root directory of X: USB ash drive.

5. Plug the 24 pin power connector to the motherboard. en turn on the power supply's AC

switch.

*ere is no need to power on the system.

6. en plug your USB drive to the USB BIOS Flashback port.

7. Press the BIOS Flashback Switch for about three seconds. en the LED starts to blink.

8. Wait until the LED stops blinking, indicating that BIOS ashing has been completed.

*If the LED light turns solid green, this means that the BIOS Flashback is not

operating properly. Please make sure that you plug the USB drive to the USB BIOS Flashback

port.

**If the LED does not light up at all then please disconnect power from the system and

remove/disconnect the CMOS battery from the motherboard for several minutes. Reconnect

power and battery and try again.

Before using the BIOS Flashback function, please suspend BitLocker and any encryp-

tion or security relying on the TPM. Make sure that you have already stored and

backup-ed the recovery key. If the recovery key is missing while encryption is active,

the data will stay encrypted and the system will not boot into the operating system. It

is recommended to disable fTPM before updating the BIOS. Otherwise an unpredict-

able failure may occur.