Gorenje SIT 2200VA [11/31] Automatic anti calc system
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Gorenje SIT 2200VA [11/31] Automatic anti calc system

Gorenje SIT 2200VA [11/31] Automatic anti calc system
11
damage.
The soleplate of the iron can become extremely
hot and may cause burns if touched.
When you have finished ironing, when you clean
the appliance, when you fill or empty the water
tank and also when you leave the iron even for a
short while: set the steam control to position 0,
put the iron on its heel and remove the mains
plug from the wall socket.
Always place and use the iron on a stable, level
and horizontal surface.
Do not put perfume, vinegar, starch, descaling
agents, ironing aids or other chemicals in the
water tank.
This appliance is intended for household use
only.
The iron is not to be used if it has been dropped,
if there are visible signs of damage or if it is
leaking.
This appliance is marked according to the European directive
2002/96/EC on Waste Electrical and Electronic Equipment
(WEEE). This guideline is the frame of a European-wide
validity of return and recycling on Waste Electrical and
Electronic Equipment.
HOW TO FILL WATER
Fill the water tank with tap water up to the maximum
level by means of the filling cup.Do not fill the tank
beyond the MAX indication. If the tap water in your
area is very hard,we advise you to use distilled
water.
BEFORE FIRST USE
Remove any sticker, protective foil or plastic from
the soleplate.
Set the required ironing temperature by turning the
temperature dial to the appropriate position.
Check the laundry care label for the required ironing
temperature:
● Synthetic fabrics (e.g. acrylic, nylon, polyamide,
polyester)
●● Silk,Wool
●●● Cotton, linen
DRY IRONING
Adjust The Variable Steam Control/Self Cleaning
Knob to minimum position " " (picture 3).
Turn the Temperature Dial in clockwise direction;
select ‘●’ (1 dot), ‘●●’ (2 dots) or‘●●●’ (3 dots)
according to the recommendation of garment label.
STEAM IRONING
Make sure that there is enough water in the water
tank. Select the recommended ironing temperature.
Select the appropriate steam setting. Make sure that
the steam setting you select is suitable for the
ironing temperature selected :
● for moderate steam (picture 3)
● for maximum steam (picture 4 )
SPRAY FUNCTION
You can use the spray function to remove stubborn
creases at any temperature.
Make sure that there is enough water in the water
tank. Press the spray button several times to
moisten the article to be ironed.(picture 5)
BURST OF STEAM (picture 6)
A powerful shot of concentrated steam helps
remove stubborn creases.The forward-directed
concentrated shot of steam enhances the
distribution of steam into every part of your garment.
The shot-of-steam function can only be used at
temperature settings between ●●● and MAX. 1
Press and release the shot-of-steam button.
Betwen every shot wait for few seconds.
VERTICAL SHOT OF STEAM
The shot-of-steam function can also be used when
you hold the iron in vertical position.This is useful for
removing creases from hanging clothes, curtains
etc. Hold the iron betwen 15 and 30 centimeters
away from the garment .(picture 7)
Never direct the steam towards people.
DRIP STOP
This iron is equipped with a drip-stop function: the
iron automatically stops producing steam when the
temperature is too low to prevent water from
dripping out of the soleplate.When this happens you
may hear a sound.
AUTOMATIC ANTI-CALC SYSTEM
The built-in anti-calc system reduces the build-up of
scale and guarantees a longer life for the iron.
SELF CLEANING
This function removes the scales and minerals built
up in the Steam Chamber. The iron will remain in
the best condition if this function is performed at
least once a month or more regularly depending on
the hardness of the water used.Turn the
Temperature Dial in clockwise direction to ‘●●●’
setting.
Pilot light goes off when the required temperature is
reached.
Wait for one more cycle; pilot light glows and goes
off.
Turn the Temperature Dial in anti-clockwise
direction to ‘Min’. Disconnect the iron from mains
supply outlet.
Hold the iron horizontally over a sink. Pull and hold
the Steam Control/Self-Cleaning Knob to
(Descaling) position.Steam and boiling hot water will
drain from the holes on the soleplate washing away

Содержание

Похожие устройства

Скачать