Oleo-Mac PW 170 C Инструкция по эксплуатации онлайн [24/140] 91833

Oleo-Mac PW 170 C Инструкция по эксплуатации онлайн [24/140] 91833

If it is not possible to protect the high pressure cleaner in cold areas as described above, it must be brought into
a warm room for the time required to melt any ice which may have formed inside it before attempting to start it
up again.
If these instructions are not followed, the high pressure cleaner may be seriously damaged.
7 CleanInGandmaIntenanCe

•Onlystartcleaningandmaintenanceoncetheinstructionsinthe“Switching off” sectionhavebeencompleted.
It is particularly important to always disconnect the electricity supply.
•Tosafeguardthesafetyofthehighpressurecleaner,onlyusetheoriginalsparepartssuppliedbytheManufacturer
orthoseendorsedbyhim.
•Therubberpipes,thecouplingandthehigh-pressurelancesareimportantforsafety:onlyusethoseendorsedby
theManufacturer.
7.1routInemaIntenanCe
Follow the instructions in the section and abide by the recommendations in the table below.
INTERVAL FOR MAINTENANCE ACTION
Each time used • Check the supply cable, high-pressure pipe, couplings, cleaner gun, lance pipe.
Should any of these parts appear to be damaged, do not use the high
pressure cleaner and contact a Skilled Technician.
Weekly • Clean the water inlet lter (15).
Usually, it is sufcient to pass the lter under running water or in a jet of compressed
air to clean it. In more difcult cases, use a lime scale remover or replace the lter.
Contact an authorised service centre for the purchase of a new lter.
Monthly • Clean the nozzle.
For cleaning, it is generally enough to pass the supplied pin (17) inside the nozzle
hole. In case you do not obtain any appreciable result, replace the nozzle by using
the supplied wrench (16). For purchasing the spare part, apply to an authorised
service centre.

During use, the high pressure cleaner should not be too noisy and large amounts of water or oil should not drip
from underneath it.
In this event, a  should test the appliance.
7.2speCIalmaIntenanCe

Only Skilled Technicians are authorised to carry out special maintenance.
Follow the instructions in the table below for special maintenance.
INTERVAL FOR MAINTENANCE ACTION
Every 100 hours Check the pump hydraulic circuit.
Check the pump xing.
Every 200 hours Replace the pump oil.
Check the pump suction/delivery valves.
Check the pump screws are tightened.
Check the pump adjustment valve.
Check the safety devices.


8 dIsmantlInGanddIsposal
Only trained personnel are allowed to dismantle the high pressure cleaner in accordance with the current regulations
in the country where it is installed.
In particular, the symbol
on the identication plate  indicates the product must not be disposed of together
with normal household waste.

Содержание

Похожие устройства

Скачать
Случайные обсуждения