Skil 7207 LK [9/112] Application advice
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Skil 7207 LK [9/112] Application advice

Skil 7207 LK [9/112] Application advice
9
• Holding and guiding the tool 9
! while working, always hold the tool at the
grey-coloured grip area(s)
- guide the tool parallel to the working surface
! do not apply too much pressure on the tool; let
the sanding surface do the work for you
- do not tilt the tool in order to avoid unwanted sanding
marks
- keep ventilation slots J 2 uncovered
APPLICATION ADVICE
• Use the tool with its standard foot plate for large working
surfaces, corners and edges 0
• Use the tool with the special sanding attachments for
hard-to-reach places !
• The exible sanding attachment is intended for
- rounding edged surfaces @a
- all rounded surfaces with a maximum diameter of 10
cm @b
• When the delta-tip is worn or damaged at the top, you
may extend its service life twice by removing it, turning it
120° and putting it back (also applicable to delta sanding
sheet) #
• Never use the same sanding sheet for wood and metal
• Recommended sanding sheet grits:
coarse - for removing paint; for sanding of extremely
rough wood
medium - for sanding of rough or plain wood
ne - for smoothing of wood; for nishing of bare
wood; for smoothing surfaces with old paint
• Use dierent grit sizes when the working surface is
rough:
- start sanding with coarse or medium grit
- nish with ne grit
• For more tips see www.skil.com
MAINTENANCE / SERVICE
• This tool is not intended for professional use
• Always keep tool and cord clean (especially ventilation
slots J 2)
- remove adhering sanding dust with a brush
! disconnect the plug before cleaning
• If the tool should fail despite the care taken in
manufacturing and testing procedures, repair should be
carried out by an after-sales service centre for SKIL
power tools
- send the tool undismantled together with proof of
purchase to your dealer or the nearest SKIL service
station (addresses as well as the service diagram of
the tool are listed on www.skil.com)
ENVIRONMENT
• Do not dispose of electric tools, accessories and
packaging together with household waste material
(only for EU countries)
- in observance of European Directive 2012/19/EC on
waste of electric and electronic equipment and its
implementation in accordance with national law,
electric tools that have reached the end of their life
must be collected separately and returned to an
environmentally compatible recycling facility
- symbol $ will remind you of this when the need for
disposing occurs
DECLARATION OF CONFORMITY
• We declare under our sole responsibility that the product
described under “Technical data” is in conformity with the
following standards or standardization documents: EN
60745, EN 61000, EN 55014, in accordance with the
provisions of the directives 2004/108/EC, 2006/42/EC,
2011/65/EU
• Technical file at: SKIL Europe BV (PT-SEU/ENG1),
4825 BD Breda, NL
¹ÊÁÂÆιÆ¼½ÊÇǾ¼½Æ
ȽʹÌÁÇÆËŵÆ¿Áƽ½ÊÁÆ¿
ÍÊÇȽƓˁ˅ʿ˂ʽ¼¹Ɠ
Ĺ¾ÁÂÿʹ¹¾
ÈÈÊÇιÄ¹Æ¹¿½Ê
09.12.2013
NOISE/VIBRATION
• Measured in accordance with EN 60745 the sound
pressure level of this tool is 71 dB(A) and the sound
power level 82 dB(A) (standard deviation: 3 dB), and the
vibration 14.3 m/s² (hand-arm method; uncertainty K =
1.5 m/s²)
• The vibration emission level has been measured in
accordance with a standardised test given in EN 60745; it
may be used to compare one tool with another and as a
preliminary assessment of exposure to vibration when
using the tool for the applications mentioned
- using the tool for dierent applications, or with dierent
or poorly maintained accessories, may signicantly
increase the exposure level
- the times when the tool is switched o or when it is
running but not actually doing the job, may signicantly
reduce the exposure level
! protect yourself against the effects of vibration
by maintaining the tool and its accessories,
keeping your hands warm, and organizing your
work patterns
Ponceuse polyvalente 7207
INTRODUCTION
• Cet outil sert au ponçage et au polissage à sec du bois,
des surfaces peintes, du plastique et du mastic
• Cet outil n’est conçu pour un usage professionnel
• Lisez et conservez ce manuel d’instruction 3
CARACTERISTIQUES TECHNIQUES 1

Содержание

Похожие устройства

Holding and guiding the tool I while working always hold the tool at the grey coloured grip area s guide the tool parallel to the working surface I do not apply too much pressure on the tool let the sanding surface do the work for you do not tilt the tool in order to avoid unwanted sanding marks keep ventilation slots J uncovered must be collected separately and returned to an environmentally compatible recycling facility symbol will remind you of this when the need for disposing occurs DECLARATION OF CONFORMITY C We declare under our sole responsibility that the product described under Technical data is in conformity with the following standards or standardization documents EN 60745 EN 61000 EN 55014 in accordance with the provisions of the directives 2004 108 EC 2006 42 EC 2011 65 EU Technical file at SKIL Europe BV PT SEU ENG1 4825 BD Breda NL APPLICATION ADVICE Use the tool with its standard foot plate for large working surfaces corners and edges Use the tool with the special sanding attachments for hard to reach places The flexible sanding attachment is intended for rounding edged surfaces a all rounded surfaces with a maximum diameter of 10 cm b When the delta tip is worn or damaged at the top you may extend its service life twice by removing it turning it 120 and putting it back also applicable to delta sanding sheet is Never use the same sanding sheet for wood and metal Recommended sanding sheet grits coarse for removing paint for sanding of extremely rough wood medium for sanding of rough or plain wood fine for smoothing of wood for finishing of bare wood for smoothing surfaces with old paint Usedifferentgritsizeswhen the working surface is rough start sandi ng with coarse or m edium grit finish with fine grit Formoretipsseewww skil com Marijn van der Hoofden Operations Engineering Olaf Dijkgraaf Approval Manager SKIL Europe BV 4825 BD Breda NL 09 12 2013 NOISE VIBRATION Measured in accordance with EN 60745 the sound pressure level of this tool is 71 dB A and the sound power level 82 dB A standard deviation 3dB and the vibration 14 3 m s2 hand arm method uncertainty K 1 5 m s2 The vibration emission level has been measured in accordance with a standardised test given in EN 60745 it may be used to compare one tool with another and as a preliminary assessment of exposure to vibration when using the tool for the applications mentioned using the tool for different applications or with different or poorly maintained accessories may significantly increase the exposure level the times when the tool is switched off or when it is running but not actually doing the job may significantly reduce the exposure level I protect yourself against the effects of vibration by maintaining the tool and Its accessories keeping your hands warm and organizing your work patterns MAINTENANCE SERVICE This tool is not intended for professional use Always keep tool and cord clean especially ventilation slots J rem we adhering sanding dust with a brush I disconnect the plug before cleaning If the tool should fail despite the care taken in manufacturing and testing procedures repair should be carried out by an after sales service centre for SKIL power tools send the tool undismantled together with proof of purchase to your dealer or the nearest SKIL service station addresses as well as the service diagram of the tool are listed on www skil com Ponceuse polyvalente 7207 INTRODUCTION ENVIRONMENT Cet outil sert au ponçage et au polissage à sec du bois des surfaces peintes du plastique et du mastic Cet outil n est conçu pour un usage professionnel Lisez et conservez ce manuel d instruction Do not dispose of electric tools accessories and packaging together with household waste material only for EU countries in observance of European Directive 2012 19 EC on waste of electric and electronic equipment and its implementation in accordance with national law electric tools that have reached the end of their life CARACTERISTIQUES TECHNIQUES 9

Скачать