ADJ Accu Fog1000 DMX Руководство по эксплуатации онлайн [13/20] 759002

Accu Fog 1000 Editing Program

American DJ® - www.americandj.com - Accu Fog 1000 Instruction Manual Page 26American DJ® - www.americandj.com - Accu Fog 1000 Instruction Manual Page 25

Editing procedure 1: Using the control board only.

1. Access the main menu.

2. Tap the UP button until “EDIT” is displayed. Press ENTER.

3. The display will show “SCXX”, the “X” again stands for the

scene number. For example, “SC01” is displayed, it means you

will be editing scene 1, press ENTER. You can change the

scene number by pressing the UP button.

11 of the editing scene, the DMX value is “XX”.

6. Adjust the DMX value by pressing the UP button, until you

get the expected effect for this channel.

7. Press ENTER to enter the editing of the other channels of the

scene.

8. Repeat steps 5-8, until you nish setting all the DMX values

for all the channels of this scene, each scene can have 15

channels maximum.

9. Once all the channels are completed, the display will ash

“TIME”, this stands for the time needed to run this scene.

editing, the display will change to the next scene automatically.

2. Tap the UP button until “EDIT” is displayed, press ENTER.

3. Tap the UP button until “REC” is displayed.

4. The display shows “RE.XX”, “XX” stands for the scene

number in the internal memory of where your scenes from the

controller will be stored.

5. Press the UP or DOWN button to select your desired scene

number.

6. Press ENTER to conrm, and the xture will record the

scenes from the external controller.

3. Tap the UP button until “RUN” is displayed, press ENTER.

4. “AUTO” is displayed. If you press the UP button it will show

“SOUN”. Select which one you want to activate, and press

ENTER.

5. Press UP, to select “ALON” or “NAST”. Which mean stand

alone, and master/slave mode.

6. Select a mode, and press ENTER to conrm.

7. Press MODE/ESC to return to the main menu.

Accu Fog 1000 Editing Program