ADJ Accu Fog1000 DMX [16/20] Master slave operation sound active or auto program

American DJ® - www.americandj.com - Accu Fog 1000 Instruction Manual Page 32American DJ® - www.americandj.com - Accu Fog 1000 Instruction Manual Page 31

Accu Fog 1000 Operation

Operating Modes: The Accu Fog 1000 can operate in three dif-

ferent modes. This next section will detail the differences in the

operating modes.

• Stand alone mode -

The unit will run in stand alone auto mode, or stand alone sound

active mode.

• Master/Slave mode -

Designer.

™

Universal DMX Control: This function allows you to use a uni-

versal DMX-512 controller such as the Elation® DMX Operator™ or

Elation® Show Designer™ to control the various DMX traits. A DMX

controller allows you to create unique programs tailored to your indi-

vidual needs.

1. The Accu Fog 1000 has a five and seven DMX channel mode.

See pages 33-35 for detailed description of the DMX traits.

2. To control your fixture in DMX mode, follow the set-up procedures

the last fixture.

7. For help operating in DMX mode consult the manual included

with your DMX controller.

Stand-Alone (Sound Active or Auto Program): This mode allows

a single unit to run to the beat of the music or run through a built-in

program.

1. Access the main menu.

2. Tap the UP button until “PLAY” is displayed, and Press ENTER.

Accu Fog 1000 Operation

3. Tap the UP button until either “AUDI” (Sound Active) or “AUTO”

(Automatic) is displayed. “AUTO” will make the unit run through

following the directions on page 17.

Master-Slave Operation (Sound Active or Auto Program):

This function will allow you to link up to 16 units together and oper-

ate without a controller. The units can run a built-in program or run in

sound actiive mode. In Master-Slave operation one unit will act as the

controlling unit and the others will react to the controlling units pro-

grams. Any unit can act as a Master or as a Slave.

1. Using standard XLR microphone cables, daisy chain your units

together via the XLR connector on the rear of the units. Remem-

ber the Male XLR connector is the input and the Female XLR

3. Tap the UP button until either “AUDI” (Sound Active) or “AUTO”

(Automatic) is displayed. “AUTO” will make the unit run through

a built-in program, while “AUDI” will make the unit sound active.

Select your preference and press ENTER.

4. Press UP to select “NAST” (Master). Press Enter to conrm. This

unit is not the Master in a master/slave conguration. All other

units daisy chained to this unit will fall into place and follow this

units direction.

5. Press MODE/ESC to return to the main menu

6. You may invert the pan and tilt functions in the system menu by