Ada GroundDrill-3 [4/38] Ground drill 3

MEASUREMENT FOUNDATION

GroundDrill - 3

2. Do not remove the gas cap or refuel while the engine is running or hot.

3. Wipe the auger body dry of any spilled gasoline after refuelling.

4. Ensure at least 3m distance from fuel sources when starting the equipment up.

5. Keep ammables away from the mufer and the exhaust path.

6. Store fuel in approved containers only and keep in a cool place.

CHECKS BEFORE START-UP

1. Check all bolts and nuts are securely tight. Tighten where necessary.

2. Check the cutting blades are well led and void of chipping, cracking or bending. NEVER use a drill when damaged.

3. Use only approved parts for repairs and maintenance.

CAUTIONS DURING USAGE

1. Do not allow other persons within 5m of the worksite. It is dangerous for pets and children to be near the equipment when operating.

2. Use caution when drilling through rocky ground. This equipment may rotate in reverse.

3. It is dangerous to use the auger in an awkward or uncomfortable position. Lay sturdy planks before starting, and work only from a

stable position.

4. Be sure to stop the engine before allowing persons to approach within 5m of the equipment. Make sure anyone approaching the auger

approaches it from the front.

5. Always stop the engine and take the necessary cautions when suspending work or moving to another location.

6. Do not allow children or anyone who is unskilled in equipment usage, to operate the equipment.

7. Never touch the drill bit while the engine is running. Be sure the engine is off and the drill has stopped rotating before handling.

8. Beware of the rotating drill bit. Keep feet, hands, other body parts, and clothes away from the drill bits.

9. Make sure the drill bit has stopped moving before placing on the ground.

10. Release throttle when the drill bit is excessively loaded or when rotation has stopped.

11. When deep drilling, do not attempt to complete work in 1 stretch. Extract soil in 2 or 3 steps.