Fulgor Milano FBC 352 NF ED [46/152] Troubleshooting guide

376215

Fault: Cause/Remedy

The appliance does not

operate after connection to the

mains:

• Check if there is power in the socket and if the appliance is

switched on.

Cooling system operates

continuously without

intermittent stoppages:

• Ambient temperature too high.

• Frequent opening of the door, door open too long.

• Door not closed properly (particle between door gasket, sagged

door, check gasket sealing, etc...).

• Excessive quantity of fresh food inserted at once.

• Refrigerator probe (A) is clogged with fresh food. Relocate the

food to provide air circulation around the probe (certain models

only).

• Check air circulation for sufﬁ cient cooling of the compressor, and

clean the condenser.

Excessive ice formation at the

rear interior wall of the freezer:

• Frequent opening of the door, door open too long.

• Inserting hot food in the freezer.

• Food or dish is touching the rear interior panel of the refrigerator.

• Bad door sealing; clean or replace the gasket if dirty or damaged.

• Groove and drain outlet located underneath the cooling panel at

the rear wall collect the drained water, so they must not be clogged

(with food particles, for example). Make sure you inspect them

periodically and clean if necessary (use plastic straw to free the

outlet hole).

• The condenser on the rear wall must always be clean and free of

dust or kitchen fumes deposits, therefore clean the dust periodically

with non-metallic brush or vacuum cleaner..

• Clean also the drip pan above the compressor. If you removed

the pan, please make sure you replace it to the same position, and

check that it is in completely horizontal position!

• Ice and/or frost deposits exceeding 3-5 mm increase energy

consumption, so you need to remove them regularly (with the

exception of the NO FROST model). Do not use sharp pointed

objects, solvents or sprays.

• After cleaning switch the appliance on and reload the food.

Troubleshooting guide