Philips HB935 [7/56] English

Keep the button pressed in to adjust the time more quickly.

3 Lie down directly under the lamp unit of the appliance.

4 Always wear the protective goggles provided if you are taking a tanning session.

5 Switch on the tanning lamps or the infrared lamps by pressing the start button ∞ (fig. 17).

B

It can take a few seconds for the lamps to go on.This is normal.

◗ A blinking dot will appear and the set time will be shown on the display (25 minutes in this case) (fig. 18).

The countdown of the set tanning or relax time will now start.

This waiting time does not apply to the infrared lamps.

6 Set a new time by pushing the ¢ or £ buttons.Then push the start button ∞ (fig. 20).

The beeping stops and the time that has just been set starts counting down.

◗ When you do not repeat the session by pressing § or set a new time during the last minute of the session, the countdown continues

and the appliance will automatically switch off as soon as the set time has passed.

Interrupting the tanning or relax session

1 You can interrupt the tanning session by pushing the pause/repeat § button (fig. 21).

The lamps will be switched off, ¶ appears in the display together with the remaining time. For 3 minutes the remaining time will blink. During this

time the lamps cool down.When the blinking has stopped, you can switch the appliance back on again by pushing the ∞ button.The remaining

time will now be counted down.

first) and push the ∞ button again (fig. 23).

2 When relaxing Ç, you can change the set time by pushing the ∞ button.The lamps will be switched off.You can set a new time and

switch the appliance back on immediately by pushing the ∞ button.The waiting time does not apply to the infrared lamps (the newly set

time does not blink on the display).

Natural fragrances

During tanning or relaxing you can enjoy your favourite fragrance.You can choose from three different fragrances.

◗ The scent granules have been specially developed for use in this appliance. Do not use other granules.

Filling the cartridge

1 Remove the cap of the cartridge by pulling while applying pressure in the small pressing points (fig. 24).

2 Open the package at the small opening at the top.

Setting the fragrance level

1 You can set the fragrance level by turning the cartridge (fig. 27).

Turn the cartridge in the direction of the large flower symbol to increase the fragrance level and turn it in the opposite direction to reduce the

fragrance level.

2 When you store the appliance or do not want it to emit a fragrance, turn the cartridge away from the large flower symbol as far as it

goes (fig. 28).

The holes will no longer be visible.

3 Replace the granules when the cartridge no longer emits any fragrance. Replacement packages with 3 sachets of scent granules are

available under type number HB080.

◗ Please bear in mind that the fragrance level depends on a number of factors, such as the following: