CAMEO Multi FX Bar EZ [7/84] Dmx deutsch francais español english italiano polski

7

DMX

DEUTSCHFRANCAIS

ESPAÑOL

ENGLISH

ITALIANO POLSKI

OPERATION

A few seconds after connecting to the mains, the effects spotlight is ready for operation and the previously selected operating mode is

activated. During the start-up process, the software version is displayed briefly (Vx.xx).

Press the MODE button several times if necessary to access the highest menu level (Addr/chAn/ModE/SEt/inFo). Use the UP and DOWN

buttons to select the menu item chAn and confirm with ENTER. Use buttons UP and DOWN to select the desired DMX mode (5ch1, 5ch2,

07ch, 10ch 25ch, 28ch, 36ch) and confirm with ENTER. The currently configured DMX start address will then be displayed. If there is no

DMX control signal, the characters in the display will flash.If the display shut-off is activated, a small LED dot will flash in the display, The

blinking stops when a DMX control signal is present. Tables with the channel assignment of the different DMX modes can be found in these

instructions under DMX CONTROL.

-> ENTER

UP/DOWN-> ENTER->

ACTIVATING STAND-ALONE MODE (ModE)

Press the MODE button several times if necessary to access the highest menu level (Addr/chAn/ModE/SEt/inFo). Use the UP and DOWN

colour macros of the 4 LED spotlights, one of the seven colour macros of the derby effects and the LED rotation speed and the strobe lights.

Activation of Static mode is as described previously in ACTIVATING STANDALONE MODE. After confirming with ENTER, select the functions

and effects one after the other with the ENTER button (see table static mode) and change values and status with the UP and DOWN keys,

and press ENTER to confirm.

UP/DOWN UP/DOWN UP/DOWN UP/DOWN

UP/DOWN

-> ENTER->