CAMEO Multi FX Bar EZ [9/84] Dmx deutsch francais español english italiano polski

DMX

DEUTSCHFRANCAIS

ESPAÑOL

ENGLISH

ITALIANO POLSKI

SLAVE MODE (SLAV)

Activation of slave mode is as described previously in ACTIVATING STANDALONE MODE. Connect the slave and the master unit (same model)

with a DMX cable (Master = DMX OUT, Slave = DMX IN) and enable one of the standalone modes on the master unit (static mode, automat-

ic-control, sound-control). Now the slave unit will follow the master unit. If there is no control signal, the characters in the display will ﬂash.If

the display shut-off is activated, a small LED dot will ﬂash in the display, The blinking stops when a control signal is present.

DEVICE SETTINGS (SEt)

Press the MODE button several times if necessary to access the highest menu level (Addr/chAn/ModE/SEt/inFo). Use the UP and DOWN

buttons to select the menu item SEt and conﬁrm with ENTER. This will take you to the submenu for setting the following submenu items

(selection with UP and DOWN, change status with UP and DOWN, conﬁrm with ENTER):

SEt (Settings)

Foot Activate/deactivate control via wireless footswitch oFF Control is disabled

on Control is activated

invt Mirrored numbering of LED spotlights, derby effects and

strobe lights (1-2-3-4 | 4-3-2-1)

oFF Non-mirrored numbering

on Mirrored numbering

diSP Switches off display after approx. 30 seconds oFF Display shutdown disabled

on Display shutdown enabled

FAiL DMX operating mode: Operating status in the event of inter-

ruption of the DMX signal

hoLd Last command is retained

bLAc Blackout

Soun sound control mode: Operating state if no usable audio signal

is present

LASt Last scene will be retained

oFF Blackout

rESt Reset device to factory settings no Do not perform reset

YES Perform reset

DEVICE INFORMATION (inFo)

Press the MODE button several times if necessary to access the highest menu level (Addr/chAn/ModE/SEt/inFo). Use the UP and DOWN

buttons to select the menu item inFo and conﬁrm with ENTER. This will take you to the submenu for reading the following device information

(selection with UP and DOWN, display with ENTER):

inFo

SoFt Display current software version V1.xx

hour Display operating time in hours xxx.x